Socket axle M11x165 made of galvanized steel for the front wheel on your Piaggio moped / moped.
The complete axle set is also equipped with the following parts:
- 2 pcs M11 x 1 nuts (SW17 / 10 mm)
- 2 pcs spacer washer (Ø 20 x 2 mm)
- 2 pcs;ck bearing cone (D19 x d13 mm / SW15)
- 3 pcs M11 x 1 nuts (SW17 / 4 mm)
- 2 pcs ball set à 8 balls (Ø 6.32 mm)
Note: On Piaggio Ciao models, this wheel axle is 20 mm (10 mm per side) longer than the original installed at the time.
You can find more threaded shafts and the high-quality alternative in the accessories section.
Made by the Italian brand CIF.
| Manufacturer | CIF |
| Material | Steel |
| Surface | galvanized (yellow), galvanized (blue) |
| Thread type | MF11x1 (fine pitch thread) |
| Ø shaft | 10.3 mm |
| Shank length | 18 mm |
| Thread length | 73 mm |
| Ball bearing closed | No |
| Width across flats SW | 17 mm, 15 mm |
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
| Total length | 165 mm |
| Height | 10 mm, 4 mm, 2 mm |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Grillo |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Color: blue · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,50 EUR
2.550,00 EUR/l
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Total length: 53.5 mm · Material: Aluminum · Material: Steel · Ø inside: 11.25 mm · Ø inside: 15 mm · Width: 9 mm · Ball bearing closed: Yes
34,30 EUR
swiing® ingenious wheel axle with bearing conversion kit cast wheel | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Total length: 150 mm · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Ø inside: 11.25 mm · Ø outside: 14.9 mm · Diameter: 15 mm · Ø outside: 20 mm · Ball bearing closed: Yes
69,60 EUR
swiing® revival wheel axle set front wheel | Piaggio SI
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 11 mm · Total length: 160 mm · Thread length: 65 mm · Shank length: 30 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm)
42,90 EUR
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Drive: Slot · Ø outside: 5 mm
2,30 EUR
GPO control bearing set | Piaggio Ciao
Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Ø inside: 27 mm · Color: silver · Ø mounting frame: 30.05 mm · Height: 10.5 mm · Height: 17 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Ø outside: 41.4 mm · Ø outside: 42 mm · Thread type: FG25.4 (1" 24G)
22,00 EUR
Not in stock
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Total length: 1350 mm · Total length: 1600 mm · Outer shell length: 2000 mm · Total length: 2180 mm
23,10 EUR
Hot
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Total length: 53.5 mm · Material: Aluminum · Material: Steel · Ø inside: 11.25 mm · Ø inside: 15 mm · Width: 9 mm · Ball bearing closed: Yes
34,30 EUR
Lock washer control head / end nut original | Piaggio Ciao
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (yellow) · Ø inside: 25.5 mm · Ø outside: 32.8 mm · Color: silver · Number of lobes: 3 pcs · Thickness: 1.5 mm · Area of application: Standard · Piaggio OEM number: 189305
3,35 EUR
Not in stock
GPO secondary nozzle PHBG (size 30 - 62.5) of your choice
Manufacturer: GPO · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: PHBG AD · Carburetor type: PHBG AS · Carburetor type: PHBG BD · Carburetor type: PHBG CS · Carburetor type: PHBG DS · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 32 · Nozzle size: 35 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 40 · Nozzle size: 42 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 62.5 · Total length: 9.5 mm · Drive: Slot
4,05 EUR
Collection only possible with online purchase and appointment.
