Gebläse & Verschalung

swiing® revival screws set fan wheel Inox | EVO, HPI

Material: Chrome steel (stainless steel) · Manufacturer: swiing® revival parts · Number of components: 6 pcs · Drive: Slot · Thread type: M6x1 (standard thread)

swiing ignition cover "Puch" emblem chrome | Puch

Material: Steel · Surface: chrome-plated · Color: Chrome · Height: 48 mm · Manufacturer: swiing · Ø outside: 130 mm · Number of fixing points: 2 pcs · Ø inside: 125 mm · Alternative version of the Puch spare part no.: 349.3.10.034.2

swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

Material: Aluminum · Surface: anodized · Color: red · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Ø outside: 120 mm · Weight: 87 g · Number of fixing points: 10 pcs · Ø mounting hole: 6 mm · Ø inside: 39 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm

Insulation board 2.3 mm for gluing 40 x 50 cm

Color: black · Total length: 500 mm · Width: 400 mm · Height: 2.3 mm · Manufacturer: Made in France

Screw M7x16 fan cover | Puch X30 Velux

Manufacturer: Puch · Material: Steel · Surface: blue galvanized · Thread type: M7x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Thread length: 16 mm · Puch spare part no.: 900.1130

swiing® revival fan wheel | Puch Velux X30

Material: Plastic · Color: black · Manufacturer: swiing® revival parts · Number of fixing points: 4 pcs · Puch spare part no.: 320.1.10.072.1

swiing® revival neck nut M7 fan cover | Puch X30 Velux

Manufacturer: swiing® revival parts · Nut type: Neck nut · Drive: External hexagon · Thread type: M7x1 (standard thread)

Siggnature grille fan cowl aluminum | Puch X30 Velux

Material: Aluminum · Height: 3 mm · Manufacturer: Siggnature · Ø outside: 84 mm

Pole wheel cover transparent | Puch E50, Z50, ZA50

Material: Polycarbonate (PC) · Color: transparent · Height: 48 mm · Ø outside: 126 mm · Number of fixing points: 2 pcs · Ø inside: 124 mm

swiing® revival protective cap shift paddle black | Puch X30 Z50

Material: Plastic · Color: black · Manufacturer: swiing® revival parts

swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

Material: Aluminum · Surface: anodized · Color: black · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Ø outside: 120 mm · Weight: 87 g · Number of fixing points: 10 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø inside: 39 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm

Blower cover aluminum silver | Puch MS, VS, DS, MV, VZ (CH)

Material: Aluminum · Ø outside: 168 mm · Number of fixing points: 2 pcs

Support screw M6 x 90/35 mm | Puch DS50, VZ50, VS50, MV50, X30, X40, X50

Total length: 90 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread length: 35 mm · Width across flats SW: 10 mm

Fan wheel ZA50 NOS | Puch X30 NG-2AH

Material: Plastic · Manufacturer: Puch · Number of fixing points: 4 pcs

Snap ring blower cover Puch DS50, VZ50, VS50, MV50

Material: Spring steel

Blank aluminum fan wheel Bosch / Ducati | Puch MS, VS, DS, MV, VZ

Material: Aluminum · Surface: raw · Ø outside: 163 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Ø inside: 90 mm · Ø bolt circle: 102 mm

Cast aluminum blower cover | Puch MS, VS, DS, MV, VZ

Material: Aluminum · Surface: polished · Color: silver · Number of fixing points: 2 pcs

Flywheel cover aluminum with logo | Puch Monza

Material: Aluminum · Surface: polished · Color: silver · Number of fixing points: 3 pcs

Siggnature repair tab fan cover Z50 | Puch X30 Velux

Material: Aluminum · Surface: anodized · Color: graphite colors · Total length: 38.5 mm · Width: 18 mm · Height: 3 mm · Height: 5.5 mm · Manufacturer: Siggnature · Hole pattern [mm]: 11.2

Flywheel cover aluminum | Puch DS50, VZ50V, VZ50M, VS50, MV50

Material: Aluminum · Ø outside: 125 mm · Ø inside: 118 mm

Exterior blower cover blank aluminum | Puch MS, VS, DS, MV, VZ

Material: Aluminum · Surface: polished

Blower cover inside blank aluminum | Puch MS, VS, DS, MV, VZ

Material: Aluminum · Color: gray

Blower cover blank aluminum | Puch MS, VS, DS, MV, VZ

Material: Aluminum · Color: silver · Ø outside: 168 mm · Number of fixing points: 2 pcs

Aluminum engine cover with pedal shaft | Puch MV50

Material: Aluminum · Color: silver · Number of fixing points: 3 pcs

Clutch cover "Triple-Clutch" | Puch E50

Material: Aluminum · Surface: anodized · Color: black · Total length: 116 mm · Width: 116 mm · Height: 38.5 mm · Manufacturer: Made in Switzerland · Ø outside: 116 mm · Number of fixing points: 4 pcs · Ø inside: 30 mm · Ø inside: 107 mm

Blower cover NOS | Puch X30 NG-2AH

Material: Aluminum · Color: silver · Manufacturer: Puch

Base plate fan cooling Occ. | Puch X30 NG-2AH

Material: Aluminum · Manufacturer: Puch

swiing® ingenious fan wheel chrome (EVO, HPI, Bosch, Ducati) | Puch X30 Velux, Sachs 503, Belmondo

Material: Aluminum · Surface: chrome-plated · Color: Chrome · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Ø outside: 120 mm · Weight: 87 g · Number of fixing points: 10 pcs · Ø mounting hole: 6 mm · Ø inside: 39 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm

Base plate blower cover ZA50 NOS | Puch X30 NG-2 AH

Material: Cast aluminum · Surface: raw · Color: silver · Total length: 255 mm · Width: 180 mm · Height: 63 mm · Manufacturer: Puch · Ø outside: 175 mm · Number of fixing points: 4 pcs · Ø inside: 124 mm

Support bolt pinion cover | Puch DS50, VZ50, VS50, MV50, X30, X40, X50

Total length: 51 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M6x1 (standard thread)

Siggnature drilling jig for repair tab fan cover Z50 | Puch X30 Velux

Material: Steel · Total length: 44 mm · Width: 18.6 mm · Height: 2 mm · Manufacturer: Siggnature · Hole pattern [mm]: 11.2