Cable duct made of dark gray plastic for Puch Maxi S, N and Supermaxi LG1, LG2 mopeds / mopeds.
The cable tunnel is mounted underneath the tank and ensures clean routing of all cables. Throttle and clutch cables are pulled through the side openings of the cable cover.
Further cable guides in various colors can be found in the accessories section.
Details
| Material | Plastic |
| Total length | 320 mm |
| Color | gray |
| Width | 58 mm |
| Height | 22 mm |
| Number of fixing points | 2 pcs |
| Ø mounting hole | 5.3 mm |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
15,00 EUR
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Color: Chrome · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 48 mm · Total length: 63 mm
17,30 EUR
Moped fans like you also bought:
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Ø outside: 2.6 mm · Ø outside: 4 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Component group Carburetor: Adjusting screws, float, etc. · Color: black · Surface: blank · Color: silver · Width: 3.3 mm · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Total length: 12 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
8,05 EUR
Not so nice 
15 mm intake manifold | Puch E50
Area of application: Tuning · Material: Aluminum · Ø inside: 14.5 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Total length: 47 mm · Height flange center hole: 43 mm · Total height: 54 mm · Ø External connection: 20 mm · Camouflaged: Yes
13,90 EUR
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Surface: sandblasted · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
38,30 EUR
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Ø inside: 94 mm · Thickness: 4.5 mm · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm · Hole spacing: 36.5 mm · Cranking (offset): 8 mm · Ø mounting hole: 6.7 mm
23,20 EUR
GPO tail light ULO | Puch Maxi N, S old version
Width: 60 mm · Depth: 80 mm · Height: 110 mm · Manufacturer: GPO · Material: Plastic · Test mark: none · Tension: 6 V · Color: black · Color: red · Ø Receptacle: 4 mm · Bulb holder: BA15s · Number of fixing points: 2 pcs · Brake light: No · Battery operated: No · Reflectors: Yes · Mounting type: Nuts & bolts
42,50 EUR
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Color: silver · Drive: External hexagon · Thread type: M6x1 (standard thread) · Number of components: 24 pcs · Thread length: 22 mm · Screw head: Hexagon · Width across flats SW: 10 mm · Shank: No · Strength class: 8.8
9,20 EUR
Collection only possible with online purchase and appointment.
