D6 Type BQ retaining ring for positioning components on axles that do not have a groove. Clamping rings are ideal for fastening emblems, for example on mopeds, mopeds and small motorcycles.
The sheet metal edge grips into the counterpart due to the spring preload and the crowning and thus protects against displacement.
Note: In many cases, disassembly is not possible without damage. In addition, locking elements should only be used once.
Further details in other sizes can be found in the accessories section.
| Nominal diameter | 6 mm |
| Fuse type | Outside |
| Material | Spring steel |
| Surface | blackened |
| Ø outside | 16 mm |
| Ø inside | 5.75 mm |
| Height | 2.3 mm |
| Place of use | Universal |
| Thickness | 0.4 mm |
Ratings
Accessories & related products
Explore categories from Screws & fastener sets
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
11,60 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm
2,35 EUR
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Brass · Material: Steel · Number of components: 1 pcs · Surface: galvanized (blue) · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Cable length: 2000 mm · Nipple length: 5.5 mm
3,95 EUR
Olympia cylinder head for 41 - 43 mm cylinder kit | Piaggio Ciao
Manufacturer: Olympia · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Ø cylinder: 41 - 43 mm · Number of fixing points: 3 pcs · Total length: 120 mm · Width: 78 mm · Height: 60 mm · Candle thread: short
30,20 EUR
Fuel tap horizontal M12x1 (with union nut) bottom outgoing | Piaggio Ciao
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut · Alternative version of the Piaggio OEM number: 103089 · Piaggio OEM number: 189525 · Piaggio OEM number: 257073
11,60 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
