Original information sticker to remind you of the back-pedal brake on your moped/moped.
This thought sticker was applied to Hercules Prima M, Optima, MX 1 and HR Hobby Rider models ex works.
Note: We recommend preparing the area to be glued with a degreasing cleaning cloth to give the stickers a firm hold.
You can find more adhesives and the aforementioned cleaning cloth in the accessories section.
| Manufacturer | Made in Germany |
| Material | Polyvinyl chloride (PVC) |
| Color | black, white |
| Rear side texture | Adhesive |
| Consistency | petrol resistant |
| Place of use | Frame (+ tank) |
| Width | 52.5 mm |
| Border | contour cut |
| Height | 26.5 mm |
| Hercules OEM number | 937.947.20.61 |
| Universal | |
| Hercules | Great - 2, 3, 4, 5, Optima MX 1 |
Ratings
Accessories & related products
Hercules" sticker (PVC carrier film) 200 x 32 mm black / white
Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Width: 200 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Height: 32 mm
11,00 EUR
Not in stock
Cockpit sticker "Remove ignition key" | Hercules Prima, Optima
Manufacturer: Made in Germany · Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC) · Surface: shiny · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Width: 40 mm · Height: 15 mm · Border: contour cut · Hercules OEM number: 204.947.20.27
8,10 EUR
Side protection sticker "Prima 2" | Hercules Prima 2
Manufacturer: Made in Germany · Material: Polyvinyl chloride (PVC) · Surface: shiny · Color: black · Color: white · Rear side texture: Adhesive · Consistency: Weatherproof · Width: 105.5 mm · Height: 19.5 mm · Border: contour cut · Hercules OEM number: 504.947.05.07
10,50 EUR
Moped fans also bought
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Stock number: 6001 · Bearing type: Deep groove ball bearing · Ø outside: 28 mm · Ø inside: 12 mm · Width: 8 mm · Ball bearing closed: Yes · Area of application: Standard
6,95 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Thread type: M5x0.8 (standard thread) · Color: silver · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
15,20 EUR
swiing® revival side protection screw 13 mm black (Puch)
Material: Plastic · Material: Steel · Color: black · Color: silver · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Thread length: 12 mm · Thread type: M5x0.8 (standard thread) · Total length: 24.5 mm
2,95 EUR
swiing® ingenious exhaust manifold 28 mm chrome | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Stud bolts & nuts · Ø inside: 25 mm · Total length: 380 mm · Ø outside: 28 mm · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
46,90 EUR
Cockpit sticker "Remove ignition key" | Hercules Prima, Optima
Manufacturer: Made in Germany · Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC) · Surface: shiny · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Width: 40 mm · Height: 15 mm · Border: contour cut · Hercules OEM number: 204.947.20.27
8,10 EUR
Collection only possible with online purchase and appointment.
