Technical data sheet DE
Attention:
The king among sealing compounds: Dirko from the quality brand Elring.
The red, permanently elastic, UV-resistant high-temperature silicone is suitable for sealing carburetors, injection pumps, fuel and oil pumps, crankcases, flange connections, etc.
Consistency: pasty, stable, permanently elastic when hardened
Temperature range: -60°C to 315°C Maximum
sealing gap: 2 mm Resistance to:
Oil, grease, fuel, coolants, cold and hot water, salt water, weak acids and alkalis
Content: 70 ml
The screw-on dosing nozzle is included in the scope of delivery.
Quality product from the German manufacturer ElringKlinger.
| Color | red |
| Manufacturer | Elring |
| Area of application | Chemistry |
| Contents | 70 ml |
| Hazard warning | Causes serious eye irritation |
| Temperature resistance (min.) | -60 - 300 °C |
| Gap dimension (max.) | 2 mm |
Ratings
Accessories & related products
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
23,20 EUR
331,43 EUR/l
Loctite 510 sealant 50 ml
Temperature resistance (min.): -55 - 250 °C · Manufacturer: Loctite · Material: Silicone · Contents: 50 ml · Area of application: Chemistry · Color: pink · Hazard warning: Causes serious eye irritation · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 0.25 mm
46,50 EUR
930,00 EUR/l
Moped fans also bought
GPO gasket set | Puch E50
Number of components: 7 pcs · Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm · Area of application: Standard
11,50 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
11,50 EUR
25,56 EUR/l
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Diameter: 5.9 mm · Width across flats: 10 mm · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Total length: 106 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
8,65 EUR
swiing® revival screw set engine galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
11,50 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Number of components: 1 pcs · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Ø inside: 106 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
4,55 EUR
Hot 
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Manufacturer: swiing® ingenious parts · Weight: 968 g · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Thread type: MF10x1 (fine pitch thread) · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Thread length: 11 mm · Thread length: 15 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Number of gears: 1 pcs
209,60 EUR
Collection only possible with online purchase and appointment.
