Clutch puller with thread protection sleeve for your Puch Maxi moped / moped with E50 engine.
The galvanized steel clutch puller is easy to use and a must for every Puch workshop.
Use the cheese head screws to secure the tool to the clutch pack. By screwing in the large hexagon head screw, you can remove the entire clutch.
You can find clutches and springs in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Surface | blackened |
| Manufacturer | GPO |
| Material | Steel |
| Area of application | (Dis)assembly tool |
Suitable for the following models
| Universal | |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Color: blue · Surface: coated · Ø outside: 8.3 mm · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø wire: 1.7 mm · Total length: 28 mm
20,50 EUR
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Chrome steel (known as Nirosta®) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
343,40 EUR
Not in stock
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 21.2 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
480,80 EUR
swiing clutch springs reinforced (+50%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Ø inside: 4.3 mm · Manufacturer: swiing · Ø outside: 8.45 mm · Total length: 26.6 mm · Material: Spring steel · Surface: coated · Color: red · Number of components: 3 pcs · Area of application: Tuning
20,50 EUR
swiing clutch springs reinforced (+60%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.9 mm · Manufacturer: swiing · Color: yellow · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
20,50 EUR
swiing® ingenious screw M12x1.25 x 51 hexagonal ball end & cap
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Area of application: Special tool · Area of application: Workshop accessories · Thread type: MF12x1.25 (fine pitch thread) · Drive: External hexagon · Screw head: Hexagon · Thread length: 42 mm · Width across flats SW: 19 mm · Number of components: 1 pcs
10,20 EUR
Moped fans like you also bought:
Clutch 3-jaw aluminum | Puch E50
Thickness: 20.9 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: Original · Area of application: Standard
57,10 EUR
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Color: blue · Surface: coated · Ø outside: 8.3 mm · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø wire: 1.7 mm · Total length: 28 mm
20,50 EUR
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Strength class: 8.8 · Area of application: (Dis)assembly tool
11,30 EUR
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
11,30 EUR
GPO piston stopper M14x1.25
Manufacturer: GPO · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Total length: 83 mm · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 17 mm
10,90 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Thickness: 1 mm · Ø inside: 106 mm · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
4,45 EUR
Collection only possible with online purchase and appointment.
