This permanent marker is suitable for marking or repairing small damaged areas and should therefore not be missing in any moped, moped or motorcycle workshop.
This paint marker was designed for smooth surfaces such as glass, metal or plastic.
Color: gold
Strike width: 2 - 4 mm
Tip: round tip
Water-resistant
Abrasion-resistant
Heat-resistant up to 400°C
Note: Before use, the permanent pen should be shaken briefly with the cap on and then the tip should be carefully pumped up and down on a test paper until color fills the tip.
Further variants of waterproof pens can be found in the accessories section.
Quality product from the German manufacturer edding.
| Temperature resistance (min.) | 0 - 400 °C |
| Manufacturer | edding |
| Area of application | Paint & varnish |
| Color | gold |
| Line width | 2 - 4 |
Accessories & related products
Explore categories from Miscellaneous
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø Silencer: 54.5 mm · Ø outside: 59 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Total length: 910 mm · Color: Chrome · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange
157,40 EUR
Inox
Hot
GPO license plate holder Inox (CH version)
Width: 105 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Total length: 145 mm · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Color: silver · Height: 5.3 mm · Hole spacing: 30 mm · Hole spacing: 50 mm
12,70 EUR
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,60 EUR
Dell'Orto 16/16 SHA carburetor hand choke
Carburetor type: SHA · Nominal diameter: 16 mm · Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Ø without reducing sleeve: 21 mm · Height: 111 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Color: black · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø Internal connection: 19 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Mixed oil connection: No · Vacuum connection: No · Width: 72 mm · Choke control: Hand choke · Mounting type: Plug connection clamped · Nozzle thread: M5x0.8 (standard thread) · Area of application: Tuning · Nozzle size: 82
81,60 EUR
GPO sprocket 9 - 21 teeth wide | Puch
Manufacturer: GPO · Material: Steel · Surface: Hardened · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Recording type: Interlocking · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Total thickness: 4.6 mm
9,20 EUR
Working late? Evening hours on Thursday until 20:00
