Disc brake system compatible with the rear 5-spoke cast wheel on your Puch moped.
The brake disc mount is compatible with both original Grimeca rims and their replicas. To install, place the rear rim between the brake disc adapter and the wheel hub, and clamp it in place using the included screws in a sandwich configuration.
The disc brake system comes ready for installation with the following components:
- Brake disc, Ø 185 mm
- Aluminum mount
- Brake lever with expansion tank
- 1,750 mm steel braided brake line
- Brake caliper with pre-installed brake pads
- 2 mounting plates
- Spacer sleeves for the wheel hub
- Screws and washers
Notes:
Please always use Loctite on the screw connections of your brake to prevent accidental loosening.
A cast wheel hub is not included. The rim hub that is already installed can be reused.
You can find front disc brake systems, as well as brake fluid and threadlocker, in the accessories section.
Brand-name product from the manufacturer FAST ARROW.
| Manufacturer | FAST ARROW |
| Ø Handlebars | 22 mm |
| Ø outside | 185 mm |
| Cable length | 1750 mm |
| Puch |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
Explore categories from Disc brake
Moped fans also bought
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Rolling circumference: 1448 mm · Color: gray · Chain pitch: 1/2" x 3/16" · Number of chain links: 114 pcs · Chain lock type: Spring lock · Surface: blank / oiled · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
39,60 EUR
Brake caliper, brake line, and brake lever for EBR forks
Material: Cast aluminum · Surface: varnished · Ø Handlebars: 22 mm · Color: gray · Thread type: M8x1.25 (standard thread) · Hole spacing: 32 mm · Hole spacing: 60 mm · Brake lever length (lever length): 162 mm · Cable length: 900 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs
192,40 EUR
Working late? Evening hours on Thursday until 20:00
