profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
logo_gpo

Universal

10898

GPO 17.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)

93,20 EUR

Incl. 19% VAT.

Description

17.5 mm PHBG replica racing carburetor for universal use for your moped, moped and small motorcycle.
This racing carburetor is suitable for tuning and is designed for racing bikes between 50 and 70 cc.

The tuning carburetor has a manually operated choke (starter slide / starter flap).
The fuel/air mixture can be perfectly adjusted using the main and secondary air flow as well as the mixture adjustment screw.

The carburetor has an M32x1.25 thread on the air filter side. The air filter can be attached directly to the thread.

Main thread size (M5): 80 (with throttle plate)
Adjacent thread size (idle thread): 50
Choked thread size: 55
Air filter connection diameter: 32 mm (M32 x 1.25)
Connection diameter of intake manifold: 24 mm (or 26 mm after removing the reducer sleeve)
Total height: 130 mm
Total width: 75 mm

Matching nozzles, air filters and intake manifolds can be found in the accessories section.

Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.

ManufacturerGPO
CamouflagedNo
Component group CarburetorCarburetor complete
MaterialAluminum
Nominal diameter17.5 mm
Colorblack
Carburetor typePHBG AS
Ø fuel hose connection6 mm, 5.3 mm
Width63 mm
Nozzle size80
Ø without reducing sleeve26 mm
Height130 mm
Total length71.5 mm
Ø Air filter connection32 mm
Mounting typePlug connection clamped, Bride
Ø Internal connection24 mm
Air filter connection threadMF32x1.25 (fine pitch thread)
Area of applicationTuning
Mixed oil connectionNo
Vacuum connectionYes
Choke controlHand choke
Choke nozzle size55
Nozzle threadM5x0.8 (standard thread)
Nozzle block262AU
Size of secondary nozzle50

Accessories & related products

Dell'Orto gasket set carburetor PHBG
undefined

Universal

10493

Dell'Orto gasket set carburetor PHBG

Manufacturer: Dell'Orto · Component group Carburetor: Sealing, revising · Carburetor type: PHBG

13,90 EUR

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50
undefined

For: Puch

10659

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50

Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Surface: polished · Color: Chrome · Ø External connection: 23.9 mm · Mounting type: Screws · Ø inside: 18.8 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 57 mm · Height flange center hole: 45 mm · Total length: 40 mm · Area of application: Tuning

20,90 EUR

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Cilo · Hercules

10703

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Nipple shape: Ball · Cable length: 1650 mm · Area of application: Standard

2,80 EUR

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Material: Brass · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92

24,40 EUR

Hot Hot
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

12179

swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70

24,40 EUR

swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

17985

swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Total length: 8 mm · Drive: Slot

24,40 EUR

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG
undefined
angle-right

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos

22000

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 31 · Nozzle size: 32 · Nozzle size: 33 · Nozzle size: 34 · Nozzle size: 35 · Nozzle size: 36 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 39 · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle size: 101 · Nozzle size: 102 · Nozzle size: 103 · Nozzle size: 104 · Nozzle size: 105 · Nozzle size: 106 · Nozzle size: 107 · Nozzle size: 108 · Nozzle size: 109 · Nozzle size: 110 · Nozzle size: 111 · Nozzle size: 112 · Nozzle size: 113 · Nozzle size: 114 · Nozzle size: 115 · Nozzle size: 116 · Nozzle size: 117 · Nozzle size: 118 · Nozzle size: 119 · Nozzle size: 120

4,10 EUR

Dell'Orto choke nozzle 60 PHBG 15 - 21 mm
undefined

Universal

23762

Dell'Orto choke nozzle 60 PHBG 15 - 21 mm

Manufacturer: Dell'Orto · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Nozzle type: Choke nozzle · Nozzle size: 60 · Drive: Slot

11,60 EUR

66HEROES Mushroom air filter grille 28 - 32 mm black
undefined

Universal

26152

66HEROES Mushroom air filter grille 28 - 32 mm black

Manufacturer: 66HEROES · Material: Metal · Material: Rubber · Area of application: Tuning · Color: black · Ø outside: 60 mm · Filter type: Grille · Total length: 114 mm · Mounting type: Plug connection clamped · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Camouflaged: No

18,60 EUR

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice
undefined
angle-right

Universal

27204

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice

Manufacturer: Dell'Orto · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Nozzle type: Secondary nozzle · Drive: Slot · Nozzle size: 30 · Nozzle size: 35 · Nozzle size: 40 · Nozzle size: 45 · Nozzle size: 50 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 65 · Nozzle size: 70

5,70 EUR

swiing® ingenious air filter Dell'Orto PHBG with screw thread
undefined
angle-right

Universal

35679

swiing® ingenious air filter Dell'Orto PHBG with screw thread

52,40 EUR

Explore categories from Carburetor

S-10-40-060-10_Bing
Bing / swiing®
S-10-40-060-20_DellOrto
Dell'Orto
S-10-40-060-30_Stage6
Stage6
S-10-40-060-40_Polini
Polini
S-10-40-060-50_Keihin
Keihin
S-10-40-060-60_Mikuni
Mikuni
S-10-40-060-70_Solex
Solex
S-10-40-060-75_Gurtner
Gurtner
S-10-40-060-80_Sonstige
Other

Moped fans also bought

Hot Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
undefined

For: Universal · Puch · Sachs · Zündapp Belmondo · Tomos · Alpa Chopper / Turbo · DKW · ILO / JLO · Kreidler · MBK / Motobécane · Miele · Monark · Victoria · Zündapp

10173

Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing

Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm

2,80 EUR

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50
undefined

For: Puch

10659

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50

Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Surface: polished · Color: Chrome · Ø External connection: 23.9 mm · Mounting type: Screws · Ø inside: 18.8 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 57 mm · Height flange center hole: 45 mm · Total length: 40 mm · Area of application: Tuning

20,90 EUR

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Cilo · Hercules

10703

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Nipple shape: Ball · Cable length: 1650 mm · Area of application: Standard

2,80 EUR

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Material: Brass · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92

24,40 EUR

AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
undefined

For: Puch

10977

AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)

Manufacturer: AKOA · Material: Plastic · Color: black-matt · Ø inside: 20.7 mm · Mounting type: Screws · Ø External connection: 26 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Area of application: Tuning

34,90 EUR

Not in stock

Intake manifold 46 / 47 mm cylinder | Puch

For: Universal · Puch

11848

Intake manifold 46 / 47 mm cylinder | Puch

Ø inside: 19 mm · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Total length: 60 mm · Total height: 75 mm · Height flange center hole: 65 mm · Number of fixing points: 2 pcs · Ø External connection: 24 mm · Mounting type: Screws · Hole spacing inlet: 38 mm

46,60 EUR

Hot Hot
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
undefined

For: Puch · Tomos

22571

swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos

Ø inside: 27.4 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Place of use: Exhaust · Hole spacing outlet: 42.5 mm

8,65 EUR

66HEROES Mushroom air filter grille 28 - 32 mm black
undefined

Universal

26152

66HEROES Mushroom air filter grille 28 - 32 mm black

Manufacturer: 66HEROES · Material: Metal · Material: Rubber · Area of application: Tuning · Color: black · Ø outside: 60 mm · Filter type: Grille · Total length: 114 mm · Mounting type: Plug connection clamped · Ø Internal connection: 28 mm · Ø Internal connection: 32 mm · Camouflaged: No

18,60 EUR