Slotted Ø 80x18 mm brake pads with return springs for the front and rear drum brakes on your Puch Maxi moped / moped.
Slotted brake pads enable improved heat and brake dust dissipation, resulting in an increased braking effect. This improved braking power is suitable for daily use, especially with slightly increased performance.
The pad compound corresponds to the AKOA alternative sold on the market. The quality is okay and the brakes fulfill their purpose, but do not reach the level of the swiing® brake pads in terms of braking performance and durability.
Note: These brake shoes are not suitable for bicycle riders.
Alternative brake pads with an even higher quality pad compound for racing applications, suitable springs and appropriate cleaning agents and lubricants can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
The set includes the following fixed parts:
Details
| Slotted | Yes |
| Manufacturer | GPO |
| Width | 18 mm |
| Ø drum | 80 mm |
| Springs included | Yes |
| Number of springs | 2 pcs |
| Area of application | Tuning |
Suitable for the following models
| Puch |
Accessories & related products
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
11,50 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Drive: Slot · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Thread length: 4 mm · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm
2,35 EUR
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Ø inside: 16.2 mm · Manufacturer: swiing® revival parts · Material: Nylon · Surface: blank · Color: black · Bearing type: Plain bearing · Total length: 19 mm · Ø Bundle: 24.1 mm · Ø outside: 20.2 mm · Puch OEM number: 349.1.42.005.1
2,90 EUR
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Material: Steel · Stock number: 6001 · Bearing type: Deep groove ball bearing · Surface: blank · Width: 8 mm · Ø inside: 12 mm · Ø outside: 28 mm · Ball bearing closed: Yes · Area of application: Standard
6,85 EUR
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm
11,50 EUR
Collection only possible with online purchase and appointment.
