
Black, external ignition coil for various Cilo mopeds / mopeds.
The ignition cable is screwed in and can be replaced if necessary.
Note: For the coil to work properly, the metal core must be reliably grounded. Special attention is required for powder-coated frames, as the thick layer of paint often prevents a secure ground connection.
Alternative ignition coils, ignition cables and spark plug connectors can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Ø cable holder | 7.5 mm |
| Place of use | External (outside the ignition) |
| Color | black |
| Cable length | 580 mm |
| Height | 60 mm |
| Mounting type | Stud bolts & nuts |
| Number of fixing points | 2 pcs |
| Total length | 60 mm, 80 mm |
| Hole spacing | 32 mm |
| Ø mounting hole | 5.2 mm |
| Cilo | 502 / 502t |
Accessories & related products
CEAB ignition coil external blue
Manufacturer: CEAB · Place of use: External (outside the ignition) · Ø cable holder: 7.5 mm · Color: black · Total length: 70 mm · Height: 40 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 5.3 mm · Hole spacing: 33 mm · Area of application: Original · Area of application: Standard
52,40 EUR
Spark plug connector / not suppressed | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Italy · Material: Phenolic resin (colloquially known as Bakelite) · Cable available: No · Spark plug socket: SAE · Suppressed: No · Color: black · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Piaggio OEM number: 103936
10,90 EUR
Not in stock
CIF ignition coil
Manufacturer: CIF · Area of application: Standard · Color: blue · Ø cable holder: 7.5 mm · Total length: 70 mm · Place of use: External (outside the ignition) · Ø mounting hole: 5.2 mm · Height: 40 mm · Number of fixing points: 2 pcs · Hole spacing: 33 mm · Mounting type: Nuts & bolts · Piaggio OEM number: 244114
44,20 EUR
Moped fans also bought
Luster terminal 3-pole black small (0.1 - 2.5 mm²)
Cable cross-section: 0.1 - 2.5 mm · Number of connections: 6 pcs · Manufacturer: Made in Germany · Material: Brass · Material: Plastic · Material: Steel · Area of application: Workshop accessories · Color: black · Clamping diameter: 3.3 mm · Total length: 18.5 mm · Width: 22 mm · Number of components: 1 pcs · Height: 15.5 mm
1,65 EUR
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
22,10 EUR
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.35 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
2,80 EUR
Fuel tap vertical M10x1 (to screw in) outgoing at the bottom / cast iron
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF10x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 65 mm · Mounting type: screw in (thread)
17,40 EUR
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats trigger: 10 mm · Width across flats trigger: 17 mm · Manufacturer: swiing® ingenious parts · Diameter: 12 mm · Diameter: 24 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Number of components: 3 pcs · Width across flats Screw: 19 mm · Total length: 100 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread)
20,90 EUR
Not in stock
GPO ignition coil external black
Manufacturer: GPO · Color: black · Ø cable holder: 7.5 mm · Cable length: 580 mm · Total length: 60 mm · Total length: 80 mm · Place of use: External (outside the ignition) · Ø mounting hole: 5.2 mm · Height: 60 mm · Number of fixing points: 2 pcs · Hole spacing: 32 mm · Mounting type: Stud bolts & nuts
40,70 EUR










