Black, adjustable shock absorbers with neon green coil springs for your moped, moped and small motorcycle.
The height and preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Bush diameter to mount: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
| Ø outside | 50 mm |
| Manufacturer | GPO |
| Surface | varnished |
| Color | neon green, black |
| Damping type | Spring |
| Adjustable | Yes |
| Total length | 330 mm |
| Mounting type | Nuts & bolts |
| Ø spars | 30 mm |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm |
| Hole spacing | 300 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
YSS shock absorber Racing 30 cm (oil pressure)
Ø outside: 52 mm · Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Color: black · Adjustable: Yes · Total length: 335 mm · Mounting type: Nuts & bolts · Ø spars: 32 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 330 mm
151,60 EUR
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
13,90 EUR
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
20,90 EUR
MKX shock absorber 30 cm chrome
Material: Aluminum · Material: Steel · Surface: chrome-plated · Manufacturer: MKX · Mounting type: Nuts & bolts · Hole spacing: 300 mm · Color: Chrome · Ø outside: 46 mm · Damping type: Spring · Adjustable: Yes · Total length: 335 mm · Number of fixing points: 2 pcs · Ø spars: 24 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm
58,20 EUR
Explore categories from Shock absorber & swingarm
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
14,60 EUR
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Total length: 30 mm · Manufacturer: swiing® revival parts · Thread length: 12 mm · Material: Steel · Nominal diameter (thread): 6 mm · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9
2,10 EUR
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Decompressor: Yes
11,60 EUR
Hot
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Total length: 6 mm · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
18,60 EUR
GPO steerer tube nut M26x1 closed fork plate chrome
Ø outside: 28.9 mm · Ø outside: 36.4 mm · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Drive: External hexagon · Thread type: MF26x1 (fine pitch thread) · Height: 13.8 mm · Nominal diameter (thread): 26 mm · Thread depth: 12 mm · Width across flats: 30 mm · Area of application: Standard
11,60 EUR
Working late? Evening hours on Thursday until 20:00
