Hot 
Complete LELEU brake plate suitable for the front wheel on Puch Maxi S & N, X30 Sport NS, NL & NG, Velux X30 moped / moped as well as some Peugeot models with 12 mm wheel axle.
The support plate is suitable for LELEU cast rims and wire spoke wheels.
The brake anchor plate was reproduced in a small series with the old casting tools and thus corresponds to the original from times gone by.
In addition, the anchor plate was equipped with high-quality NewFren brake pads.
An alternative brake plate for 11 mm axles and a matching wheel hub can be found in the accessories section.
Quality product from the French manufacturer LELEU.
Original Puch spare part number: 349.1.40.007.2 / 349.1.40.807.9
| Manufacturer | LELEU |
| Material | Aluminum |
| Ø drum | 80 mm |
| Ø axle | 12 mm |
| Ø bore | 12.1 mm |
| Puch OEM number | 349.1.40.007.2, 349.1.40.807.9 |
| Puch |
Accessories & related products
GPO brake anchor plate front 11 mm axle (1A quality) | Puch Maxi S, N / X30 Sport NS, NL / Velux
Ø outside: 95 mm · Manufacturer: GPO · Material: Aluminum · Thread size: M6 · Ø External brake pads: 80 mm · Ø bore: 11.3 mm · Ø axle: 11 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 78 mm
69,90 EUR
Not in stock
Hot
LELEU wheel hub spoke wheel front 36 holes with anchor plate & axle | Puch
Manufacturer: LELEU · Material: Aluminum · Ø drum: 80 mm · Axle length: 160 mm · Thread type: MF11x1 (fine pitch thread) · Ø outside: 115 mm · Ø axle: 11 mm · Number of spoke holes: 36 pcs · Area of application: Original · Ø spoke hole: 3.7 mm
186,60 EUR
Explore categories from Hub & axle
Moped fans also bought
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Ø inside: 94 mm · Number of teeth: 45 pcs · Color: black · Thickness: 4.5 mm · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs · Cranking (offset): 8 mm
23,20 EUR
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø outside: 11.8 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm · Ø shaft: 11.9 mm · Width across flats: 19 mm · Shank length: 100 mm
17,40 EUR
swiing® revival screw set sprocket mounting Inox | Puch Maxi
Manufacturer: swiing® revival parts · Number of components: 24 pcs · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Color: gray · Screw head: Hexagon · Thread length: 22 mm · Drive: External hexagon · Shank: No · Width across flats: 10 mm
15,10 EUR
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø outside: 91 mm · Total length: 187 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm
81,60 EUR
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø outside: 92 mm · Total length: 135 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
87,40 EUR
swiing® revival wheel axle set M12x1 x 165 mm cast & spoke hub | Puch
Manufacturer: swiing® revival parts · Diameter: 12 mm · Material: Steel · Surface: galvanized (blue) · Total length: 165 mm · Thread type: MF12x1 (fine pitch thread) · Thread length: 40 mm · Thread length: 50 mm · Ø shaft: 11.95 mm · Width across flats: 19 mm · Shank length: 75 mm
34,90 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
