Oldie luggage carrier with clamp for your older Piaggio Ciao P moped / moped.
The rear luggage carrier is only suitable for the old model with rigid, angular seat post and rear light on the mudguard.
Mounting takes place at the original attachment points under the saddle and on the screws of the seat stays. The tool compartment remains accessible.
Total length: 500 mm
Width: 165 mm
Height: 100 mm
Fixing distance front: 60 mm
Fixing distance rear: 131 mm
Length of luggage carrier clamp: 220 mm
Matching luggage bags as well as an alternative luggage carrier can be found in the accessories section.
A quality product made in Italy.
| Manufacturer | Made in Italy |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Mounting type | Screws, Nuts & bolts |
| Total length | 500 mm |
| Number of fixing points | 4 pcs |
| Width | 165 mm |
| Height | 100 mm |
| Hole spacing | 60 mm, 131 mm |
| Ø mounting hole | 6.5 mm, 9 mm |
| Piaggio | Ciao - P |
Ratings
Accessories & related products
Luggage carrier Classic Chrome | Piaggio Ciao P
Ø mounting hole: 6.5 mm · Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Mounting type: Screws · Total length: 575 mm · Number of fixing points: 4 pcs · Height: 100 mm · Hole spacing: 85 mm · Hole spacing: 135 mm · Width: 140 mm · Piaggio OEM number: 114151
129,10 EUR
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm
12,80 EUR
Not in stock
Not so nice 
Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG
Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm
23,40 EUR
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SHA · Nominal diameter: 16 mm · Choke control: Hand choke · Color: black · Width: 72 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Height: 111 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 82 · Mounting type: Plug connection clamped · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Mixed oil connection: No · Vacuum connection: No · Area of application: Tuning · Camouflaged: No
82,10 EUR
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Material: Plastic · Ø outside: 20 mm · Color: transparent · Color: white · demountable: No · Filter type: Plastic net · Ø inside: 3 mm · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm · Total length: 23.4 mm · Total length: 50 mm
6,80 EUR
swiing® revival air filter original gray | Sachs 503
Material: Plastic · Color: gray · Total length: 165 mm · Height: 52 mm · Manufacturer: swiing® revival parts · Width: 68 mm · Filter type: Standard sieve · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Area of application: Original · Area of application: Standard · Camouflaged: No
52,80 EUR
swiing® revival screw set galvanized fan cover | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Screw head: Panhead · Number of components: 8 pcs · Thread type: M5x0.8 (standard thread)
5,75 EUR
Collection only possible with online purchase and appointment.
