
High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
| Manufacturer | mofakult Merch |
| Material | Plastic |
| Color | black |
| Thread type | M5x0.8 (standard thread) |
| Number of fixing points | 9 pcs, 2 pcs |
| Total length | 175 mm |
| Width | 108 mm |
| Height | 11 mm |
| Mounting type | Nuts & bolts |
| Ø mounting hole | 6 mm |
| Hole spacing | 50 mm |
| Thread length | 6 mm |
Accessories & related products
Plastic license plate holder (CH version)
Manufacturer: Made in Switzerland · Thread type: M5x0.8 (standard thread) · Material: Brass · Material: Plastic · Color: black · Width: 108 mm · Hole spacing: 50 mm · Height: 11 mm · Mounting type: Nuts & bolts · Number of fixing points: 9 pcs · Total length: 175 mm · Thread length: 6 mm · Ø mounting hole: 6 mm
9,20 EUR
Normio Flanged Washer M4–M12 (Assorted Sizes), Galvanized
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
0,35 EUR
Normio M8x16 Cylinder Head Screw, Low Profile, Hex Socket, Zinc-Plated
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: Hexagon socket · Screw head: Cylinder head · Width across flats: 5 mm · Thread length: 16 mm · Strength class: 8.8
1,65 EUR
Normio Spring Washer M6 6.2/11.8/1.6, Galvanized
Manufacturer: Normio · Material: Spring steel · Surface: galvanized (blue) · Area of application: Standard · Ø outside: 11.4 mm · Ø inside: 6.4 mm · Nominal diameter inside: 6 mm · Nominal diameter (thread): 6 mm · Thickness: 1.8 mm · Thread size: M6
0,45 EUR
Normio M6x22 Hex Head Screw, Galvanized
Manufacturer: Normio · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Thread type: M6x1 (standard thread) · Color: silver · Drive: External hexagon · Total length: 26 mm · Screw head: Hexagon · Nominal diameter (thread): 6 mm · Width across flats: 10 mm · Thread length: 22 mm · Strength class: 8.8
1,30 EUR
Normio M6 Galvanized Nut
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Hexagon nut 0.8D · Thread type: M6x1 (standard thread) · Drive: External hexagon · Height: 4.8 mm · Nominal diameter (thread): 6 mm · Strength class: 8 · Width across flats: 10 mm
0,60 EUR
Normio Screw M5x12, Pan Head, Phillips, Zinc-Plated
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Nominal diameter (thread): 5 mm · Drive: Cross recess · Total length: 16 mm · Screw head: Lens head · Ø External head: 10 mm · Shank: No · Thread length: 12 mm · Strength class: 4.8
1,20 EUR
Normio M5x10 Pan-Head Hex Socket Screw, Zinc-Plated
Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Nominal diameter (thread): 5 mm · Drive: Hexagon socket · Total length: 13 mm · Screw head: Lens head · Ø External head: 9.5 mm · Width across flats: 3 mm · Shank: No · Thread length: 10 mm · Strength class: 10.9
1,05 EUR
Explore categories from Number holder
Moped fans also bought
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
2,35 EUR
Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube
Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Wheel size: 16 - 17 " · Wheel size: 17 " · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve · Alternative version of the Puch OEM number: 567.060700 · Alternative version of the Puch OEM number: 901.0863 · Alternative version of the Puch OEM number: 902.0853
12,30 EUR
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Total length: 1350 mm · Total length: 1600 mm · Outer shell length: 2000 mm · Total length: 2180 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
23,20 EUR










