Chrome-plated, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 360 mm
Outer diameter of coil spring: 46 mm
Holt diameter: 24 mm
Bush diameter for mounting: 10 / 8 mm
The diameter can be shortened from 10 mm to 8 mm at the mounting points using the plastic bushes supplied.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery includes one pair.
Rear springs in other colors, the matching adjustment key, washers and fastening material can be found in the accessories section.
Suspension strut from the MKX-SHOCK brand.
| Manufacturer | MKX |
| Surface | chrome-plated |
| Color | Chrome |
| Damping type | Spring |
| Ø outside | 46 mm |
| Number of fixing points | 2 pcs |
| Ø spars | 24 mm |
| Adjustable | Yes |
| Mounting type | Nuts & bolts |
| Ø Fastening inside | 8 mm, 10 mm |
| Hole spacing | 360 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Alignment time: 600 sec · Color: blue · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,50 EUR
2.550,00 EUR/l
Moped fans like you also bought:
swiing® revival nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Total length: 6 mm · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Quantity: 6 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
18,50 EUR
Handlebar fork plate 30 cm curved with chrome strut
Color: Chrome · Ø outside: 22 mm · Manufacturer: Made in Germany · Height: 270 mm · Material: Steel · Surface: chrome-plated · Mounting type: Fork plate · Clamping diameter: 22 mm · Fork plate holder length: 90 mm · Length handlebar ends: 155 mm · Width: 680 mm · Crossbar: Yes
38,30 EUR
Transval speedometer drive 17" with grease nipple
Place of use: left · Place of use: right · Manufacturer: Transval · Material: Aluminum · Color: gray · 4-edge speedometer cable: 1.9 mm · Wheel size [inch]: 17 " · Ø axle: 11 mm · Total height: 52 mm · Overall width outside: 60 mm · Thread type: MF10x1 (fine pitch thread) · Ø outside: 41 mm · Ø mounting hole: 11 mm
34,80 EUR
Cut cable set Black | Sachs Automatic
Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 1650 mm · Total length: 1850 mm · Total length: 2200 mm · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm
25,50 EUR
Magura cable clamp Ø 6 x 9
Ø outside: 6 mm · Total length: 9 mm · Manufacturer: Magura · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: blank · Surface: galvanized (blue) · Area of application: Standard · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Number of components: 1 pcs · Width across flats SW: 6 mm · Thread length: 5 mm
2,35 EUR
Collection only possible with online purchase and appointment.
