Polini has placed particular emphasis on size and weight in the development of the CP model; this carburetor is therefore particularly compact and around 40% lighter than traditional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This is intended to simplify carburetor tuning and enable high performance with low consumption. All CP carburetors have an oil and vacuum connection.
Inlet connection diameter: 24 or 26 mm if the bushes are removed.
Connection diameter of air filter: 46 mm
Main nozzle size: 66
Side nozzle size: 42
Choke is located directly on the carburetor and must be operated by hand.
Special Polini nozzles must be used.
Quality product from the Italian manufacturer Polini.
| Carburetor type | CP |
| Nominal diameter | 19 mm |
| Manufacturer | Polini |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Total length | 73.5 mm |
| Ø Internal connection | 24 mm |
| Mounting type | Plug connection clamped |
| Ø without reducing sleeve | 26 mm |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Ø Air filter connection | 46 mm |
| Width | 66 mm |
| Height | 135 mm |
| Ø fuel hose connection | 7 mm, 6 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Area of application | Tuning, Racing, Performance, High End |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Nozzle size | 66 |
| Camouflaged | No |
| Size of secondary nozzle | 42 |
Accessories & related products
Polini intake system 4-folding diaphragm "Big Valve" PHBG / CP carburetor | Puch
Manufacturer: Polini · Material: Aluminum · Material: Plastic · Surface: glass bead blasted · Area of application: Racing · Area of application: Tuning · Ø inside: 28.6 mm · Number of flaps: 4 pcs · Ø outside: 24 mm · Membrane material: Carbonite · Thick membrane platelets: 0.3 mm · Number of fixing points: 4 pcs · Thread type: M5x0.8 (standard thread) · Mounting type: Screws · Ø mounting hole: 5.2 mm · Camouflaged: No
162,60 EUR
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Nipple length: 5 mm · Number of components: 1 pcs · Area of application: Standard
3,25 EUR
Airsal intake manifold 46 / 47 mm cylinder | Puch
Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Ø inside: 19 mm · Total length: 60 mm · Ø External connection: 24 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Height flange center hole: 65 mm · Mounting type: Screws · Total height: 75 mm · Camouflaged: No
46,40 EUR
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Quantity: 10 pcs · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 54 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
46,40 EUR
Polini jet set (60 - 78) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Drive: External hexagon
46,40 EUR
Collection only possible with online purchase and appointment.
