Polini CP 19 carburetor for your racing moped, moped and small motorcycle with the highest demands. The racing carburetor developed by Polini has a compact design and is around 40 % lighter than comparable carburetors. The air flow is optimized thanks to the short intake path and the circular passage. The larger needle and an adapted mixing tube support the atomization of the gas mixture. This makes it very easy to tune the carburetor. In addition, consumption is reduced even at high power levels.
Fastening to the intake manifold is by means of a rubber sleeve.
Installed main jet: 90
Installed secondary jet: 40
Ø Nominal: 19 mm
Ø Air filter connection: 46 mm
Ø Intake manifold connection: 25 mm
Alternative racing carburetors, the sleeve for installation and the matching nozzles can be found in the accessories section.
Quality product from the Italian manufacturer Polini.
| Manufacturer | Polini |
| Camouflaged | No |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Nominal diameter | 19 mm |
| Width | 66 mm |
| Ø Inside entrance | 42 mm |
| Total length | 71 mm |
| Height | 132 mm |
| Ø Output inside | 21.8 mm |
| Mounting type | Rubber sleeve |
| Ø Air filter connection | 47 mm |
| Ø fuel hose connection | 6 mm, 7 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Nozzle size | 90 |
| Size of secondary nozzle | 40 |
| Area of application | Tuning, Racing, Performance |
Accessories & related products
Polini CP 17.5 mm carburetor (hand choke)
Nominal diameter: 17.5 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: CP · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Nozzle size: 62 · Area of application: Tuning · Size of secondary nozzle: 40
163,30 EUR
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
46,60 EUR
Polini jet set (81 - 99) main jets long version CP, Keihin, Koso, PWK
Material: Brass · Manufacturer: Polini · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 83 · Nozzle size: 85 · Nozzle size: 87 · Nozzle size: 89 · Nozzle size: 91 · Nozzle size: 93 · Nozzle size: 95 · Nozzle size: 97 · Nozzle size: 99
46,60 EUR
Polini 26 mm carburetor (hand choke)
Nominal diameter: 26 mm · Manufacturer: Polini · Camouflaged: No · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Width: 65 mm · Height: 155 mm · Carburetor type: Flat slide valve · Total length: 83 mm · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 105 · Size of secondary nozzle: 45
169,10 EUR
Polini CP 15 mm carburetor (hand choke) rubber flange
Nominal diameter: 15 mm · Manufacturer: Polini · Camouflaged: No · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Width: 66 mm · Height: 132 mm · Carburetor type: CP · Total length: 71 mm · Ø Inside entrance: 42 mm · Ø Output inside: 21 mm · Ø Air filter connection: 47 mm · Mounting type: Rubber sleeve · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Nozzle size: 70 · Size of secondary nozzle: 36
157,40 EUR
Polini CP 17.5 mm carburetor (hand choke) rubber flange
Nominal diameter: 17.5 mm · Manufacturer: Polini · Camouflaged: No · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Width: 66 mm · Height: 132 mm · Carburetor type: CP · Total length: 71 mm · Ø Inside entrance: 42 mm · Ø Output inside: 21.5 mm · Ø Air filter connection: 47 mm · Mounting type: Rubber sleeve · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Nozzle size: 80 · Size of secondary nozzle: 36
163,30 EUR
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Number of components: 1 pcs · Area of application: Standard
2,80 EUR
Inox
Hot
Bumm mirror round Inox
Total length: 360 mm · Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Test mark: none · Surface: chrome-plated · Color: Chrome · Thread type: M8x1.25 (standard thread) · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Thread size: M8
32,60 EUR
Dell'Orto 17.5 mm PHBG carburetor cable choke
Nominal diameter: 17.5 mm · Manufacturer: Dell'Orto · Area of application: Tuning · Component group Carburetor: Carburetor complete · Width: 75 mm · Height: 130 mm · Carburetor type: PHBG · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Choke control: Cable choke · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 82 · Size of secondary nozzle: 55
145,70 EUR
Not in stock
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
46,60 EUR
Bumm mirror round Inox black
Mirror property: none · Total length: 350 mm · Manufacturer: Bumm · Material: Steel · Test mark: none · Surface: varnished · Color: black-matt · Thread type: M8x1.25 (standard thread) · Ø mirror surface: 98 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Thread size: M8
34,90 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
