High-quality 21 mm CP carburetor kit with clamp connection for your moped, moped and small motorcycle.
The set was designed by Polini for the Puch Maxi S, N moped / moped models with E50 engine, but can also be used universally for countless other makes and models.
During the development of the CP models, special emphasis was placed on size and weight, making this carburetor particularly compact and around 40% lighter than conventional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This should simplify the tuning of the carburetor and enable high performance with low consumption. In addition, all CP carburetors have an oil and vacuum connection.
| Nominal diameter | 21 mm |
| Manufacturer | Polini |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Mounting type | Plug connection |
| Ø without reducing sleeve | 25 mm |
| Ø Internal connection | 24 mm |
| Ø Air filter connection | 46 mm |
| Ø fuel hose connection | 6 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Cable choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Area of application | Tuning |
| Nozzle size | 100 |
| Size of secondary nozzle | 40 |
| Puch |
Ratings
Accessories & related products
Polini 24 mm carburetor (hand choke)
Nominal diameter: 24 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Area of application: Tuning · Mounting type: Plug connection · Carburetor type: Flat slide valve · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread)
176,10 EUR
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Material: Brass · Manufacturer: Polini · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138
46,90 EUR
Polini jet set (140 - 158) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Nozzle type: Main nozzle · Drive: External hexagon · Nozzle size: 140 · Nozzle size: 142 · Nozzle size: 144 · Nozzle size: 146 · Nozzle size: 148 · Nozzle size: 150 · Nozzle size: 152 · Nozzle size: 154 · Nozzle size: 156 · Nozzle size: 158
46,90 EUR
Polini 26 mm carburetor (hand choke)
Nominal diameter: 26 mm · Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Total length: 83 mm · Ø Inside entrance: 26 mm · Width: 65 mm · Ø Output inside: 26 mm · Height: 155 mm · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 105 · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 45
170,20 EUR
Polini 32 mm carburetor (hand choke)
Nominal diameter: 32 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Total length: 83 mm · Nozzle size: 122 · Ø Inside entrance: 32 mm · Ø Output inside: 32 mm · Height: 155 mm · Ø Air filter connection: 55 mm · Width: 78 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Camouflaged: No · Size of secondary nozzle: 42
223,10 EUR
Polini racing exhaust "for race" blanco | Puch Maxi, X30
Manufacturer: Polini · Material: Steel · Surface: blank · Ø Silencer: 60 mm · Total length: 900 mm · Number of fixing points: 2 pcs · Exhaust type: Cone / double cone · Flame tube attachment: Flange · Flame tube attachment: suspended
434,60 EUR
Moped fans also bought
GPO 45 mm cylinder kit 70 ccm | Puch
Nominal diameter: 45 mm · Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 24.6 mm · Inlet window: 21.8 x 14.6 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
117,40 EUR
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Material: Spring steel · Color: blue · Total length: 28 mm · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.3 mm · Number of components: 3 pcs · Surface: coated · Area of application: Tuning
21,00 EUR
swiing® revival nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Material: Brass · Total length: 6 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Quantity: 6 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
18,70 EUR
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
38,70 EUR
Athena 45 mm cylinder kit 70 ccm camouflaged | Puch
Nominal diameter: 45 mm · Material: Aluminum · Number of fixing points: 4 pcs · Manufacturer: Athena · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 23.5 mm · Inlet window: 22.3 x 14 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
186,70 EUR
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Material: Brass · Manufacturer: Polini · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138
46,90 EUR
GPO 12 mm intake manifold Puch X30 NG-2AH
Number of fixing points: 2 pcs · Ø inside: 12 mm · Manufacturer: GPO · Material: Aluminum · Mounting type: Screws · Ø External connection: 20 mm · Hole spacing inlet: 32 - 38 mm · Total length: 53 mm · Area of application: Original · Height flange center hole: 52.5 mm · Total height: 63 mm · Camouflaged: No
46,90 EUR
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Ø inside: 4.3 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.45 mm · Total length: 26.6 mm · Color: red · Material: Spring steel · Area of application: Tuning · Surface: coated · Number of components: 3 pcs
21,00 EUR
Collection only possible with online purchase and appointment.
