Winter Check-Up
Drives, brakes, steers – but better.
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø Fastening inside: 10 mm · Ø spars: 32 mm · Ø outside: 52 mm · Mounting type: Nuts & bolts · Hole spacing: 330 mm · Number of fixing points: 2 pcs
158,60 EUR
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 91 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Total length: 187 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm
79,30 EUR
IMCA Shock absorber fork chrome | Piaggio Ciao (Racing)
Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Damping type: Hydraulic (oil) · Adjustable: No · Total length: 270 mm · Color: Chrome · Mounting type: Nuts & bolts · Hole spacing: 170 mm · Number of fixing points: 2 pcs
96,30 EUR
Shock absorber 30 cm silver / black (pair) | Puch Maxi S, Supermaxi
Ø outside: 38.2 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 300 mm · Material: Aluminum · Material: Plastic · Material: Steel · Color: black · Color: silver · Damping type: Spring · Adjustable: No · Total length: 300 mm · Total length: 330 mm · Surface: coated · Ø Fastening inside: 8.1 mm · Ø spars: 25 mm · Puch OEM number: 349.3.21.550.0 · Puch OEM number: 349.4.21.550.0
90,60 EUR
swiing® ingenious repair kit fork (selection) Inox | Piaggio Ciao PX, C24
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (colloquially known as stainless steel) · Material: Rubber · Material: Spring steel · Surface: electropolished · Color: Chrome · Color: black · Ø outside: 28.4 mm · Ø inside: 20 mm · Ø wire: 4.25 mm · Ø wire: 4.5 mm · Total length: 110 mm
70,20 EUR
63,20 EUR
swiing® ingenious steering bearing M26x1 (for Ø 30 mm steering head tube) High End
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: gas nitrided · Color: black · Bearing type: Bearing ring · Ø mounting frame: 30.3 mm · Ø outside: 43 mm · Ø inside: 26.8 mm · Thread type: MF26x1 (fine pitch thread)
62,30 EUR
55,50 EUR
EBR fork chrome reinforced | Puch
Total length: 580 mm · Manufacturer: EWC · Material: Steel · Color: Chrome · Surface: chrome-plated · Adjustable: No · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Head tube length: 180 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm
150,70 EUR
swiing® revival fork repair kit | Puch
Manufacturer: swiing® revival parts · Puch OEM number: 349.1.30.820.1 · Puch OEM number: 349.1.30.117.1 · Puch OEM number: 349.1.30.137.1 · Puch OEM number: 349.1.30.135.1 · Puch OEM number: 349.1.30.126.1 · Puch OEM number: 349.2.30.134.1 · Puch OEM number: 367.1.30.031.1
101,90 EUR
90,60 EUR
Brake pads make all the difference
Brake pads transfer the force from your hand to the brake.
If they are too thin or glazed, braking performance is significantly reduced.
Typical signs:
- Long braking distance
- spongy pressure point
- Squeaking or rubbing
Replacing them is not rocket science, but it is important for safety.
Constant pressure point
Disc brakes brake significantly more evenly and efficiently than drum brakes.
Wet conditions and temperature hardly play a role.
Technically, this means:
- direct power transmission
- less fading
- better controllability
Winter is ideal for retrofitting because there is time for precise adjustment.
What the damper really does
The shock absorber keeps the wheel on the ground.
Not only does it provide suspension, it also stabilises the entire chassis.
If it is worn out or incorrectly adjusted,
- the rear end bounces
- the wheel loses grip
- and the handling becomes unstable
A functioning damper provides directional stability and a significantly more stable driving experience.
New
Hot 
Tivedens engine cylinder kit 41 mm S3 fan-cooled | Sachs 50/2 (DE), 50/3
Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Area of application: Tuning · Surface: varnished · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread)
328,70 EUR
New
Hot
Tivedens engine cylinder kit 41 mm S3 | Sachs 50/2 (DE), 50/3, 50/4
Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Area of application: Tuning · Surface: varnished · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread)
328,70 EUR
New
Hot
Tivedens engine cylinder kit 41 mm S4 | Sachs 50/2 (DE), 50/3, 50/4
Manufacturer: Barikite · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Area of application: Tuning · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 18 mm · Ø outlet inside: 30 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF36x1.5 (fine pitch thread)
362,70 EUR
OMG fuel tap horizontal M12x1 (with union nut) outgoing at the bottom, metal lever | Puch Maxi S, N
Manufacturer: OMG · Material: Aluminum · Outer width: 18 mm · Surface: blank · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Thread type: MF12x1 (fine pitch thread) · Mounting type: screw in (thread) · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: curved · Reserve level: 60 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
14,60 EUR
Polini diaphragm block | Minarelli horizontal
Manufacturer: Polini · Material: Carbonite · Material: Plastic · Material: Steel · Thread type: M6x1 (standard thread) · Mounting type: Screws · Number of flaps: 4 pcs · Width: 36.3 mm · Width: 39.7 mm · Width: 64.9 mm · Width: 75.2 mm · Membrane material: Carbonite · Thick membrane platelets: 0.35 mm · Total length: 38.9 mm · Ø mounting hole: 6.4 mm · Thickness: 3.5 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 52.5 x 62 · Hole spacing: 52.5 mm · Hole spacing: 62 mm
39,60 EUR
swiing® revival screw set M8x22 cylinder head cast hub chrome | Puch
Manufacturer: swiing® revival parts · Number of components: 5 pcs · Material: Steel · Color: Chrome · Drive: Hexagon socket · Total length: 30 mm · Screw head: Cylinder head · Surface: chrome-plated · Thread type: M8x1.25 (standard thread) · Ø External head: 14.8 mm · Width across flats: 6 mm · Thread length: 22 mm · Puch OEM number: 321.1.40.205.1
26,00 EUR
Siggnature Tankbar
On 6 February 2026, Tankbar will be back at Siggnature Bikes in Saland.
As on every first Friday of the month, there will be a bar, live music and a food truck.
Just friendly people, bikes and good conversation.
Collection only possible with online purchase and appointment.
