Black fastening screw with a thread length of 37 mm for the side fairings of your Puch Supermaxi P1 XL moped / moped.
The clamping screw has the special two-part end head, as was standard on the P1 catalytic converter Maxi models.
Dimensions of the fairing screw:
Thread: M5
Thread length: 37 mm
Ø screw head: 21 mm
Original Puch spare part number: 535.062600
| Color | black |
| Thread type | M5x0.8 (standard thread) |
| Ø External head | 21 mm |
| Thread length | 37 mm |
| Puch | E50 |
Accessories & related products
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
15,10 EUR
Buzzetti main stand extended black (1A quality) | Puch Maxi S, P1 | X30 NS, NL, NG
Manufacturer: Buzzetti · Material: Steel · Surface: powder-coated · Total height: 240 mm · Stand base - center mount (A): 225 mm · Total width of stand base (B): 235 mm · Wide receptacle (C): 63 mm · Ø Receptacle (D): 18.5 mm · Color: black · Spring nipple distance - center pivot axis (E): 100 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 50 mm · Puch OEM number: 321.2.24.001.2
74,10 EUR
ULO rear light NOS | Puch Maxi P1
Manufacturer: ULO · Material: Plastic · Bulb holder: BA9s · Width: 90 mm · Mounting type: Nuts & bolts · Color: orange · Color: red · Color: white · Test mark: E1 · Test mark: E4 · Brake light: No · Battery operated: No · Height: 85 mm · Reflectors: Yes · Number of fixing points: 2 pcs · Depth: 50 mm
60,10 EUR
Moped fans also bought
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Component group Carburetor: Adjusting screws, float, etc. · Surface: blank · Color: black · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 2.6 mm · Ø outside: 4 mm · Carburetor type: 18 Catalyst · Carburetor type: 85 · Total length: 12 mm · Width: 3.3 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
8,05 EUR
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Total length: 66 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Mounting type: Plug connection clamped · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
75,80 EUR
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Thread type: M8x1.25 (standard thread) · Screw head: Hexagon · Drive: External hexagon · Drive: Slot · Width across flats Screw: 13 mm · Total length: 18 mm · Thread length: 12 mm · Puch OEM number: 901.1053
4,10 EUR
Spotlight round Ø 13 cm chrome
Area of application: Standard · Bulb holder: BA15d · Housing material: Sheet metal (steel) · Surface: chrome-plated · Tension: 6 V · Tension: 12 V · Color: Chrome · Color: transparent · Thread size: M6 · Lens material: Plastic · Ø outside: 130 mm · Ø External connection: 12 mm · Number of fixing points: 2 pcs · Speedometer recording: None · Test mark: none · Switch included: No · Width: 135 mm · Battery operated: No · Height: 146 mm · Depth: 80 mm · Mounting type: Screws
30,20 EUR
Screw M4x12 pan-head galvanized
Material: Steel · Surface: galvanized (blue) · Thread type: M4x0.7 (standard thread) · Screw head: Lens head · Drive: Cross recess · Shank: No · Total length: 12 mm · Strength class: 8.8 · Alternative version of the Pony OEM number: A1406 · Alternative version of the Sachs OEM number: 0240 106 101
2,25 EUR
GPO sprocket 42 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Ø inside: 94 mm · Number of teeth: 42 pcs · Number of fixing points: 6 pcs · Hole spacing: 36.5 mm · Ø mounting hole: 6.7 mm · Hole spacing 2: 68 mm · Ø bolt circle: 105.5 mm · Cranking (offset): 8 mm
23,20 EUR
Collection only possible with online purchase and appointment.
