Rubber bumper for the 1st generation of the original fork on your Piaggio Ciao P moped / moped.
This protective rubber with 8 mm pin was only installed on very early models.
However, the rubber stud is also suitable for later forks where the drill hole has become larger due to corrosion or the rubber stud with 7 mm stud does not stay perfectly in position.
Price per piece. Two pieces are required to overhaul the fork.
You can find other wear parts for your fork in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 103699
Alternative to the original Piaggio spare part number: 176373
Details
| Manufacturer | Made in Italy |
| Material | Rubber |
| Color | black |
| Total length | 22 mm |
| Ø mounting hole | 8 mm |
| Width | 16 mm |
| Piaggio OEM number | 103699 |
| Alternative version of the Piaggio OEM number | 176373 |
Suitable for the following models
| Piaggio | Ciao - P |
Accessories & related products
swiing® revival fork spring Ø 24 mm reinforced (pair) Inox | Piaggio Ciao P, SC
Total length: 100 mm · Ø wire: 4.25 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: electropolished · Color: Chrome · Ø inside: 16.25 mm · Ø outside: 24.75 mm · Piaggio OEM number: 113124
32,50 EUR
swiing® ingenious axle swing arm set | Piaggio Ciao
Material: Brass · Material: Chrome steel (known as Nirosta®) · Manufacturer: swiing® ingenious parts · Total length: 50 mm · Drive: External hexagon · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm · Ø Bearing inside: 12.85 mm · Ø outside: 16 mm · Ø outside: 22 mm · Color: gold
34,80 EUR
Not so nice 
Fork repair kit (galvanized springs) | Piaggio Ciao
Material: Plastic · Material: Rubber · Material: Spring steel · Material: Steel · Surface: galvanized (blue) · Surface: powder-coated · Total length: 99 mm · Ø wire: 3.8 mm · Ø inside: 20 mm · Ø outside: 27.4 mm · Color: black · Color: silver
46,50 EUR
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Mounting type: Union nut · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
11,50 EUR
CIF wheel axle set M11x1 x 165 mm front wheel galvanized | Piaggio Ciao, SI, Bravo
Height: 2 mm · Height: 4 mm · Height: 10 mm · Total length: 165 mm · Manufacturer: CIF · Material: Steel · Surface: galvanized (blue) · Surface: galvanized (yellow) · Thread type: MF11x1 (fine pitch thread) · Thread length: 73 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Shank length: 18 mm · Ø shaft: 10.3 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm)
17,30 EUR
GPO control bearing set | Piaggio Ciao
Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø outside: 41.4 mm · Ø outside: 42 mm · Ø inside: 27 mm · Ø mounting frame: 30.05 mm · Thread type: FG25.4 (1" 24G) · Height: 10.5 mm · Height: 17 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
22,00 EUR
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
23,20 EUR
Oil seal NBR 20/30/5 A Gearbox original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø outside: 30 mm · Ø inside: 20 mm · Width: 5 mm
6,85 EUR
swiing® ingenious axle swing arm set | Piaggio Ciao
Material: Brass · Material: Chrome steel (known as Nirosta®) · Manufacturer: swiing® ingenious parts · Total length: 50 mm · Drive: External hexagon · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm · Ø Bearing inside: 12.85 mm · Ø outside: 16 mm · Ø outside: 22 mm · Color: gold
34,80 EUR
Collection only possible with online purchase and appointment.
