Additional weight made of stainless steel suitable for HPI Zündungen from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds / mopeds with blower.
The weight is mounted underneath the blower wheel. The weight is mainly used to increase the flywheel mass.
The additional weight makes the engine run more smoothly when stationary and makes starting easier without stalling the engine, which is often the case with a lightened flywheel.
You can find the corresponding flywheel and other attachments in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
| Thickness | 5 mm |
| Manufacturer | swiing® ingenious parts |
| Number of fixing points | 4 pcs |
| Ø mounting hole | 5 mm |
| Material | Chrome steel (colloquially known as stainless steel) |
| Ø inside | 71.8 mm |
| Weight | 250 g |
| Ø outside | 117 mm |
| Area of application | Performance, Racing, High End, Tuning |
| Ø bolt circle | 101 mm |
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo |
Ratings
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Weight: 340 g · Area of application: Tuning
350,00 EUR
HPI racing ignition clockwise without light
Manufacturer: HPI · Material: Aluminum · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 62 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Weight: 424 g · Area of application: Tuning
326,60 EUR
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Weight: 337 g · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Cone length: 28 mm · Cone ratio: 1:5 · Ø Flywheel outside: 71.5 mm · Thread type: MF27x1 LH (fine/left-hand thread)
111,90 EUR
HPI stator ignition
Manufacturer: HPI · Material: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: anodized · Color: black · Tension: 12 V · Performance: 60 W · Number of cables: 4 pcs · Cable length: 640 mm · Ø inside: 27.5 mm · Ø outside: 90 mm · Number of fixing points: 6 pcs · Ø bolt circle: 80 mm
174,90 EUR
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Weight: 87 g
69,90 EUR
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Weight: 100 g · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 1.8 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
23,20 EUR
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Material: Plastic · Color: red · Total length: 63 mm · Width: 100 mm · Height: 28 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.5 mm · Hole spacing: 80 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
355,80 EUR
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs
2,80 EUR
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
12,70 EUR
28,22 EUR/l
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Weight: 340 g · Area of application: Tuning
350,00 EUR
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Weight: 87 g
69,90 EUR
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Weight: 100 g · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 1.8 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
23,20 EUR
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing® ingenious parts · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
437,50 EUR
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Weight: 87 g
72,90 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
