Hot 
Flywheel puller compatible with all Piaggio mopeds, such as the Ciao, Si, Bravo, and Boxer.
A very high-quality flywheel puller that shows no signs of wear on the threads even after countless uses.
Function:
- The small sleeve is screwed onto the crankshaft shaft. This serves to protect the crankshaft thread.
- The special tool with an M17x1 thread is screwed onto the magneto wheel.
- Using a 17 mm open-end wrench, tighten the screw on the puller until the ignition wheel comes loose.
You’ll find the parts you need to overhaul your ignition system in the accessories section.
A sophisticated product from the premium brand swiing® that meets the highest standards.
| Width across flats trigger | 17 mm, 10 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue), blackened |
| Area of application | (Dis)assembly tool |
| Number of components | 3 pcs |
| Diameter | 24 mm, 12 mm |
| Thread type | MF17x1 (fine pitch thread), MF12x1.5 (fine pitch thread) |
| Total length | 100 mm |
| Width across flats Screw | 19 mm |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Area of application: Original · Area of application: Standard · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Ø mounting hole: 4.4 mm · Height: 26 mm · Total height: 31 mm · Piaggio OEM number: 102939
13,90 EUR
GPO stator electronic ignition with light (three outputs) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Number of fixing points: 3 pcs · Hole spacing: 34.5 mm · Tension: 12 V · Ø inside: 29.5 mm · Number of cables: 6 pcs · Performance: 90 W · Ø outside: 105 mm · Cable length: 100 mm · Cable length: 400 mm · Piaggio OEM number: 219965
139,90 EUR
GPO flywheel 800 g full cheek shaft electronic ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Aluminum · Thread type: MF17x1 (fine pitch thread) · Direction of rotation: right · Ø Internal flywheel: 106 mm · Ø Flywheel outside: 139.5 mm · Weight: 800 g · Alternative version of the Piaggio OEM number: 181103 · Alternative version of the Piaggio OEM number: 2238183
155,10 EUR
Not in stock
M12x1.25 x 40 Hex Head Screw, Black
Color: black · Total length: 47.5 mm · Strength class: 8.8 · Material: Steel · Surface: blackened · Thread type: MF12x1.25 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 12 mm · Shank: No · Width across flats: 19 mm · Thread length: 40 mm
5,70 EUR
swiing® ingenious screw M12x1.25 x 51 hexagonal ball end & cap
Manufacturer: swiing® ingenious parts · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 12 mm · Area of application: Special tool · Area of application: Workshop accessories · Screw head: Hexagon · Width across flats: 19 mm · Thread length: 42 mm
10,40 EUR
swiing® ingenious ignition cams +/- 2° Athena / Jasil crankshaft | Piaggio Ciao, SI, Bravo, Boxer
Ø inside: 14.4 mm · Total length: 9.5 mm · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Alternative version of the Piaggio OEM number: 103137
26,70 EUR
swiing® ingenious ignition cams +/- 4° Athena / Jasil crankshaft | Piaggio Ciao, SI, Bravo, Boxer
Ø inside: 14.4 mm · Total length: 9.5 mm · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Alternative version of the Piaggio OEM number: 103137
26,70 EUR
Thread protection cap Ø16.7/18.2 x 9 mm
Ø inside: 16.4 mm · Ø outside: 18.1 mm · Color: transparent · Material: Plastic · Thread type: MF17x1 (fine pitch thread) · Thread type: MF17x1.25 (fine pitch thread) · Nominal diameter (thread): 17 mm · Clamping diameter: 16.7 mm · Ø Bundle: 21.8 mm · Waistband height: 1.4 mm · Total height: 9 mm · Thread length: 7.8 mm
1,75 EUR
Explore categories from Tools
Moped fans also bought
Hot
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Capacity: 0.26 µF · Area of application: Original · Area of application: Standard · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Ø mounting hole: 4.4 mm · Height: 26 mm · Total height: 31 mm · Piaggio OEM number: 102939
13,90 EUR
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Area of application: Original · Area of application: Standard · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø outside: 18 mm · Ø mounting hole: 4.4 mm · Height: 26 mm · Total height: 31 mm · Piaggio OEM number: 102939
13,90 EUR
Working late? Evening hours on Thursday until 20:00
