Chain guard for your Zündapp Belmondo moped / moped.
The steel cover plate has been faithfully reproduced and painted. Thanks to the weld nuts, the plate is ready to install and can be mounted directly to the blower cover with two screws.
Hole spacing: 66 mm
Thread: M4
Thickness: 0.5 mm
Material: steel
Surface: painted
The chain guard plate provides a perfect finish and is a must-have for every original Belmondo restoration.
You can find more add-on parts for your Zündapp in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | varnished |
| Color | silver |
| Total length | 99 mm |
| Height | 137 mm |
| Thread type | M4x0.7 (standard thread) |
| Number of fixing points | 2 pcs |
| Zündapp Belmondo |
Ratings
Accessories & related products
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain pitch: 1/2" x 3/16" · Ø bore: 4.05 mm · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø Pin: 4 mm
22,20 EUR
swiing® revival 17" rear fender Inox | Zündapp Belmondo
Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Manufacturer: swiing® revival parts · Surface: polished · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 595 mm · Mounting type: Nuts & bolts · Scope: 950 mm · Wide mudguard profile: 70 mm · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 305 mm · Wheel size: 17 "
93,90 EUR
swiing® revival 17" front fender Inox | Zündapp Belmondo
Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Manufacturer: swiing® revival parts · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 525 mm · Mounting type: Nuts & bolts · Scope: 638 mm · Wide mudguard profile: 69 mm · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 157 mm · Wheel size: 17 "
70,40 EUR
swiing® revival rear mudguard strut chrome | Zündapp Belmondo
Number of fixing points: 3 pcs · Ø mounting hole: 6.5 mm · Manufacturer: swiing® revival parts · Color: Chrome · Surface: chrome-plated · Material: Steel · Distance mudguard - center hole: 318 mm · Mounting type: Nuts & bolts · Total length: 345 mm
42,20 EUR
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Area of application: Standard
2,80 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
11,60 EUR
25,78 EUR/l
Fuel tap vertical M10x1 (to screw in) outgoing at the bottom / cast iron
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 65 mm · Thread type: MF10x1 (fine pitch thread) · Mounting type: screw in (thread)
17,50 EUR
Collection only possible with online purchase and appointment.
