Choke lever for attachment to the left brake lever on your moped, moped or small motorcycle.
The decompression lever with slotted mount is attached to older grip units (e.g. Magura) with a clamping screw and nut.
Figure 3 & 4 shows the mounted decompression lever and is for illustrative purposes only.
You can find the clamping nipple for attaching the cable that matches the decompression lever, throttle grips and other starter lever versions in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Place of use | left |
| Manufacturer | swiing® revival parts |
| Color | white |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Ratings
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
2,25 EUR
Magura deco / clutch lever black
Manufacturer: Magura · Material: Plastic · Material: Steel · Housing material: Steel · Surface: burnished · Color: black · Material lever: Plastic · Ø inside: 22 mm · Total length: 94 mm · Number of fixing points: 2 pcs · Thread type: M5x0.8 (standard thread) · Mounting type: Screws
56,60 EUR
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1800 mm · Area of application: Standard · Pony OEM number: P0919
2,75 EUR
swiing® revival decorative lever slotted mount left black (Magura)
Manufacturer: swiing® revival parts · Material: Plastic · Material: Sheet metal (steel) · Place of use: left · Surface: galvanized (blue) · Surface: raw · Color: black · Total length: 50 mm · Thickness: 1.2 mm · Height: 19.6 mm
28,20 EUR
Explore categories from Handles & fittings
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
2,25 EUR
Speedometer 60 km/h Ø 48 mm black / chrome
Manufacturer: Made in Germany · Material: Metal · Material: Plastic · Surface: chrome-plated · Color: Chrome · Color: black · Color: red · Color: white · Ø Receptacle: 48 mm · Ø outside: 50.4 mm · Maximum speed: 60 Km/h · Lighting: Light slit · Signal type Tacho: analog · 4-edge speedometer cable: 1.8 mm · Thread type: MF10x1 (fine pitch thread) · Depth: 50 mm · Total height: 70 mm
67,90 EUR
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Performance: 100 W · Type of current: Alternating current (AC) · Width: 27 mm · Height: 15 mm · Total length: 50 mm · Ø mounting hole: 6 mm · Mounting type: Screws
39,60 EUR
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1800 mm · Area of application: Standard · Pony OEM number: P0919
2,75 EUR
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Total length: 250 mm · Width: 170 mm · Thickness: 0.4 mm · Ø inside: 86 mm · Number of fixing points: 16 pcs · Number of components: 1 pcs · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
6,70 EUR
Collection only possible with online purchase and appointment.
