Complete fork lock set for various Puch forks.
The mounting block for the fork lock is made of iron and is CNC machined from solid material.
The block is welded to the fork.
With original forks, this mounting block is often rusted or worn out.
Our product is the perfect alternative and ensures that the fork lock can be operated cleanly and without jamming.
Scope of delivery as shown in image 1 (block, notched nail and fork lock incl. 2 keys).
Nostalgic product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Manufacturer: swiing® revival parts
Manufacturer: GPO · Material: Steel · Surface: blank · Area of application: Standard · Ø Pin: 2.75 mm · Nominal diameter: 2.5 mm · Ø External head: 5 mm · Total length: 10 mm
Manufacturer: GPO · Material: Brass, Steel, Spring steel · Surface: blank · Total length: 40.8 mm · Length of turned part: 25.6 mm · Locking block length: 15.3 mm · Ø outside: 12 mm · Ø rotating part: 12 mm · Ø Pin: 8 mm · Width: 17 mm · Wide locking block: 4.1 mm
Details
| Manufacturer | swiing® revival parts |
| Material | Steel, Brass |
Suitable for the following models
| Puch |
Moped fans like you also bought:
Clutch 3-jaw aluminum | Puch E50
Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 20.9 mm · Area of application: Original · Area of application: Standard
57,10 EUR
Not so nice 
Chrome luggage rack | Puch Maxi S
Height: 32.5 mm · Total length: 425 mm · Material: Steel · Surface: chrome-plated · Width: 168 mm · Wheel size [inch]: 17 " · Color: Chrome · Hole spacing: 29 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs
22,80 EUR
GPO fork lock | Puch
Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Ø outside: 12 mm · Width: 17 mm · Total length: 40.8 mm · Length of turned part: 25.6 mm · Ø Pin: 8 mm
11,30 EUR
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: powder-coated · Ø inside: 94 mm · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Color: black · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Thickness: 4.5 mm · Hole spacing 2: 68 mm · Hole spacing: 36.5 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm
22,80 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm
11,30 EUR
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing type: Deep groove ball bearing · Stock number: 6001 · Ø inside: 12 mm · Ø outside: 28 mm · Width: 8 mm · Inner ring width: 12 mm · Manufacturer: NTN · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Area of application: Standard
6,75 EUR
Collection only possible with online purchase and appointment.
