Extension for the fuel dabber on Bing carburetors.
Fits Bing SSN, SSE, SRF, 85, SRA, SSB and many more.
Depending on the shape of the dabber, the extension must be fixed with a little glue, which you can find in the accessories section.
Swab extension length: 69 mm
Ø inside: 8.3 (slightly tapered)
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Component group Carburetor | Adjusting screws, float, etc. |
| Material | Plastic |
| Color | black |
| Ø inside | 8.3 mm |
| Carburetor type | SRE, SRF, SSN, SSE, SRA (1/11/35) Velux, SRA (1/11/31) Velux, SSB, SLA |
| Total length | 69 mm |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 503 - AAL , ABL , 2AL / 2BL , AB , AC 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
| Zündapp Belmondo | |
| ILO / JLO | |
| Kreidler | Flory MF |
Accessories & related products
swiing® revival swabs short Bing SRE, SSN, SSE, SRF, 85, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Ø outside: 8 mm · Ø inside: 2.5 mm · Total length: 25 mm · Pony OEM number: A2430 · Sachs OEM no.: 0281 109 000
4,55 EUR
swiing® revival choke extension Bing carburetor
Manufacturer: swiing® revival parts · Material: Plastic · Component group Carburetor: Choke control · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSN · Choke control: Hand choke · Ø inside: 3.25 mm · Ø outside: 6 mm · Ø outside: 8 mm · Total length: 50 mm
6,90 EUR
Loctite superglue 3 g (401)
Manufacturer: Loctite · Material to be used: porous materials · Area of application: Chemistry · Color: transparent · Contents: 3 g · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Type of application: 1K · Alignment time: 5 sec · Temperature resistance (min.): -40 - 140 °C
16,20 EUR
5.400,00 EUR/kg
Dab long Bing SRE, SSN, SSE, SRF, 85, SRA
Ø outside: 6 mm · Ø outside: 8 mm · Total length: 25 mm · Total length: 40 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Plastic · Material: Steel · Color: white · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Ø Passage: 2.5 mm
4,45 EUR
Moped fans also bought
swiing® revival stud bolt inlet/outlet M6 x 30 (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Total length: 30 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9
2,10 EUR
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Material: Steel · Nipple shape: Cylinder · Number of components: 1 pcs · Area of application: Standard
2,80 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Ø inside: 41 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
3,25 EUR
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Component group Carburetor: Sealing, revising · Material: Sealing paper · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm
5,70 EUR
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Height: 95 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Camouflaged: Yes · Area of application: Tuning · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
93,20 EUR
swiing® revival choke extension Bing carburetor
Manufacturer: swiing® revival parts · Material: Plastic · Component group Carburetor: Choke control · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSN · Choke control: Hand choke · Ø inside: 3.25 mm · Ø outside: 6 mm · Ø outside: 8 mm · Total length: 50 mm
6,90 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
