Cast aluminum rear wheel hub compatible with the cast wheel rim on your Puch Maxi S moped with a Z50 engine.
Among other things, this wheel hub can also be installed on Puch Maxi and Supermaxi models with an E50 engine or an air-cooled ZA50 engine, as well as on Puch X30 NG-2AH or NG-2A models with a fan-cooled ZA50 engine, provided that a conversion to a coaster brake is desired.
The high-quality wheel hub was manufactured using the casting process, just like the original from back then, and then precisely machined using CNC technology. The press-fit brake drum is made of high-quality special steel and is firmly connected to the cast hub by cast-in aluminum pins.
To put a huge smile on your face right from the moment you start the installation, the hardened bearing shells are already pressed into the coaster brake hub.
Notes:
This wheel hub was installed as standard on Puch Maxi S models with coaster brakes in Germany. Swiss models can be retrofitted accordingly.
Sprockets with a bolt circle diameter of 115 mm and an inner diameter of 98 mm are required.
You’ll find a complete coaster brake mechanism, a matching brake anchor plate, as well as brake cams, brake pads, and sprockets in the accessories section.
A nostalgic product from the premium swiing® brand that meets the highest standards.
| Total length | 89 mm |
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Ø drum | 90 mm |
| Surface | glass bead blasted |
| Number of fixing points | 5 pcs |
| Ø bolt circle | 115 mm, 106 mm |
| Puch |
Accessories & related products
swiing® revival wheel nut M10.5x1 x 7 SW22 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut 0.8D · Nominal diameter (thread): 10.5 mm · Drive: External hexagon · Thread type: MF10.5x1 (fine pitch thread) · Width across flats: 22 mm · Height: 7 mm
9,20 EUR
Not in stock
swiing® revival wheel nut M10.5x1 x 5 SW22 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut 0.5D · Nominal diameter (thread): 10.5 mm · Drive: External hexagon · Thread type: MF10.5x1 (fine pitch thread) · Width across flats: 22 mm · Height: 5 mm
8,65 EUR
GPO sprocket 45 teeth 4-hole Grimeca/Snowflake rim
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 45 pcs · Ø inside: 98 mm · Cranking (offset): 9 mm · Number of fixing points: 4 pcs · Ø bolt circle: 115 mm
51,20 EUR
ESJOT Toothed Ring, 45 Teeth, 4/5/6-Hole, Ø 98 mm, Offset, Galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 45 pcs · Ø inside: 98 mm · Ø mounting hole: 6.6 mm · Thickness: 4.5 mm · Cranking (offset): 10 mm · Number of fixing points: 4 pcs · Number of fixing points: 5 pcs · Number of fixing points: 6 pcs · Ø bolt circle: 115 mm
40,70 EUR
ESJOT Gear Ring, 42 Teeth, 4/5/6-Hole, Ø 98 mm, Offset, Galvanized
Chain type: 415H · Ø inside: 98 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: galvanized (blue) · Number of teeth: 42 pcs · Chain pitch: 1/2" x 3/16" · Ø mounting hole: 6.6 mm · Thickness: 4.5 mm · Ø bolt circle: 115 mm · Number of fixing points: 4 pcs · Number of fixing points: 5 pcs · Number of fixing points: 6 pcs · Cranking (offset): 10 mm
40,70 EUR
ESJOT Gear Ring, 40 Teeth, 4/5/6-Hole, Ø 98 mm, Offset, Galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 40 pcs · Ø inside: 98 mm · Ø mounting hole: 6.6 mm · Thickness: 4.5 mm · Cranking (offset): 10 mm · Number of fixing points: 4 pcs · Number of fixing points: 5 pcs · Number of fixing points: 6 pcs · Ø bolt circle: 115 mm
40,70 EUR
Not in stock
swiing® revival brake anchor plate HR 905 rear coaster hub | Puch Maxi S, X30 NS / NL
Ø outside: 91.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 90 mm · Ø axle: 10.6 mm · Ø shaft: 10 mm · Ø bore: 10 mm · Total length: 193 mm · Cranking (offset): 13 mm · Puch OEM number: 349.541.507.0
151,60 EUR
swiing® revival bearing cone M10.5x1 with dust ring back pedal
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Thread type: MF10.5x1 (fine pitch thread) · Height: 13.3 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Width across flats: 15 mm · Puch OEM number: 320.2.41.014.1
34,90 EUR
Explore categories from Hub & axle
Moped fans also bought
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Ø inside: 25 mm · Stock number: K042 · Ø outside: 36 mm · Width: 6.8 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard
9,20 EUR
ESJOT sprocket 37 teeth coaster brake galvanized
Chain type: 415H · Ø inside: 94 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: galvanized (blue) · Number of teeth: 37 pcs · Chain pitch: 1/2" x 3/16" · Ø mounting hole: 6.5 mm · Thickness: 4.1 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs · Hole spacing: 74 mm
55,90 EUR
Working late? Evening hours on Thursday until 20:00
