Wonderful «Ciao» tank emblem made of silicone for your Piaggio Ciao moped / moped.
The chrome-colored sticker with orange border is a visual highlight and gives your Ciao that certain something extra.
The change from the small to the large stickers took place in the middle of the SC model series. As a result, this 109x25 mm sticker fits into all large fuel tank entries of the SC, PX and C24 models.
This 3D sticker was applied at the factory in Switzerland to the last models produced before 2006. Earlier models were supplied with either the aluminum tank sticker or the «Piaggio» 3D sticker with a silver background.
Dimension: 109x25x1.2 mm
Material: silicone
Durability: petrol-resistant
Price per piece.
The area to be covered should be free of grease and dirt in order to provide a firm hold for the sticker.
Suitable cleaning cloths can be found along with other decals in the accessories section.
Quality product from the Italian manufacturer Piaggio in original equipment quality.
Original Piaggio spare part number: 814489
Alternative to the original Piaggio spare part number: 298723, 813875
Details
Width | 109 mm |
Manufacturer | Piaggio |
Material | Silicone |
Color | Chrome, orange |
Thickness | 1.2 mm |
Rear side texture | Adhesive |
Height | 25 mm |
Piaggio OEM number | 814489 |
Alternative version of the Piaggio OEM number | 298723, 813875 |
Suitable for the following models
Piaggio | Ciao - C24 |
Accessories & related products
Tank sticker "Ciao" 3D silicone 115 x 27 mm original | Piaggio Ciao
Manufacturer: Piaggio · Material: Silicone · Width: 115 mm · Height: 27 mm · Rear side texture: Adhesive · Mounting type: glue · Thickness: 2 mm · Alternative version of the Piaggio OEM number: 298723 · Piaggio OEM number: 813875 · Alternative version of the Piaggio OEM number: 814489
15,00 EUR
Tank sticker "PIAGGIO" 3D silicone 115 x 27 mm original | Piaggio Ciao, SI, Bravo
Manufacturer: Piaggio · Material: Silicone · Place of use: Tank (+ frame) · Total length: 115 mm · Height: 1.5 mm · Width: 27 mm · Rear side texture: Adhesive · Consistency: petrol resistant · Color: black · Color: silver · Puch OEM number: 298723
15,00 EUR
Not in stock
Sticker gel "KAT" left & right side protection | Piaggio Ciao, SI, Grillo
Material: Silicone · Color: black · Color: gold · Color: gray · Color: yellow · Width: 155 mm · Height: 22 mm · Surface: rubberized · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Housing cover · Border: contour cut
25,00 EUR
Moped fans like you also bought:
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Number of components: 1 pcs · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
2,80 EUR
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
34,80 EUR
swiing® revival clamping screw rear brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Total length: 21.5 mm · Ø shaft: 10.5 mm · Number of components: 3 pcs · Thread type: M7x1 (standard thread) · Width across flats SW: 11 mm · Thread length: 11 mm · Width across flats SW: 14 mm · Alternative version of the Piaggio OEM number: 154533
6,75 EUR
GPO license plate holder Inox black
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: black-matt · Surface: varnished · Total length: 147 mm · Width: 105 mm · Height: 6 mm · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs
15,00 EUR