The world has never seen pedals like these before!
The solid aluminum pedals can be folded in. This saves you a whole 6 cm.
This may not seem like much, but it can be crucial when space is tight or during transportation.
With non-slip tread with cams on both sides.
Thread: 9/16"
Length: 115 mm
Width: 85 mm
Height: 27 mm
The reflectors on the sides contribute to road safety.
We recommend mounting the folding pedals with Loctite threadlocker.
In addition, a flat fork wrench is required for assembly.
Both products can be found in the accessories section below.
Price per pair.
Included in delivery are two additional aluminum washers for spacing.
Quality product from the manufacturer wellgo.
| Manufacturer | wellgo |
| Material | Aluminum, Plastic |
| Surface | coated |
| Total length | 115 mm |
| Color | black |
| Width across flats | 15 mm |
| Width | 85 mm |
| Thread type | FG14.3 (9/16" 20G) |
| Height | 27 mm |
| Reflectors | Yes |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Color: blue · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
Moped fans also bought
GPO chain tensioner | Puch Maxi S
Surface: galvanized (blue) · Color: black · Color: silver · Total length: 175 mm · Manufacturer: GPO · Number of fixing points: 1 pcs · Material: Plastic · Material: Steel · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm
11,60 EUR
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Mounting type: Union nut · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,60 EUR
swiing® revival seal Float SRE, SRC, SRF, SRA
Surface: blank · Thickness: 1.5 mm · Manufacturer: swiing® revival parts · Ø inside: 41 mm · Ø outside: 45 mm · Component group Carburetor: Sealing, revising · Material: Sealing paper · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
3,25 EUR
Hot
swiing® revival side protection screw set black | Puch Maxi S
Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
15,10 EUR
Transval speedometer drive 16" bracket with grease nipple
Manufacturer: Transval · Material: Aluminum · Color: gray · Place of use: left · Place of use: right · Wheel size: 16 " · 4-edge speedometer cable: 2.6 mm · Ø outside: 41 mm · Ø mounting hole: 11 mm · Ø axle: 11 mm · Thread type: MF10x1 (fine pitch thread) · Overall width outside: 50 mm · Total height: 52 mm
32,60 EUR
Dell'Orto 12/12 SHA carburetor hand choke | Piaggio Ciao PX, C24
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Width: 60 mm · Carburetor type: SHA (Piaggio) · Height: 110 mm · Nominal diameter: 12 mm · Total length: 55 mm · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 50.6 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 48 · Mounting type: Plug connection clamped · Area of application: Tuning
75,70 EUR
Not in stock
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
