Not so nice 
M11x154 wheel axle made of galvanized steel for your moped, scooter, and small motorcycle.
The axle can be used for front wheels and, to a limited extent, for rear wheels as well.
The complete threaded shaft set also includes the following parts:
- 2 M11 x 1 nuts (SW17 / 5 mm)
- 1 washer (Ø 20 x 1.8 mm)
- 2 bearing cones (Ø 18 x 13.1 mm / SW14)
- 2 bearing cups (Ø 29.3 / 26 / 13.5 x 9.2 mm)
- 3 M11 x 1 nuts (SW17 / 10 mm)
- 2 dust rings (Ø 29.2 / 20.5 x 0.4 mm)
- 2 spacer rings (Ø 16.5 / 11.3 x 5 mm)
So-so! – We strive to offer you the widest selection of moped replacement parts. However, the quality of this product is rather so-so, and we do not recommend it. If you still decide to go with this item, we understand, but we cannot offer any warranty or exchange.
Unfortunately, the included cones and bearing shells are not of high quality and should therefore be replaced with swiing® parts, which can be found in the accessories section.
You can find a high-quality alternative, as well as wheel nuts and cones, in the accessories section.
| Material | Steel |
| Surface | galvanized (blue) |
| Total length | 154 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Ø shaft | 10.3 mm |
| Thread length | 62 mm |
| Shank length | 30 mm |
| Puch |
| Sachs |
Accessories & related products
Nut M11x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Hexagon nut 1D · Drive: External hexagon · Height: 10 mm · Thread type: MF11x1 (fine pitch thread) · Nominal diameter (thread): 11 mm · Width across flats: 19 mm · Strength class: 8
2,90 EUR
swiing® revival nut M11x1 x 4 SW19 wheel nut galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon flat nut · Height: 4 mm · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread) · Nominal diameter (thread): 11 mm · Width across flats: 19 mm · Strength class: 8
3,40 EUR
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
swiing® revival nut M11x1 x 10 SW17 wheel nut Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut 1D · Height: 10 mm · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread) · Nominal diameter (thread): 11 mm · Width across flats: 17 mm
7,45 EUR
GPO cap nut M11x1 SW17 wheel nut chrome
Height: 21.5 mm · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Drive: External hexagon · Nominal diameter (thread): 11 mm · Thread type: MF11x1 (fine pitch thread) · Thread depth: 14 mm · Width across flats: 17 mm
10,40 EUR
66HEROES Mounting pin M11x1 Wheel axle License plate holder side Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Ø outside: 15 mm · Height: 32 mm · Drive: External hexagon · Nominal diameter (thread): 11 mm · Thread type: MF11x1 (fine pitch thread) · Width across flats: 17 mm
15,10 EUR
66HEROES cap nut M11x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Nut type: Cap nut · Thread type: MF11x1 (fine pitch thread) · Drive: External hexagon · Height: 26.2 mm · Nominal diameter (thread): 11 mm · Width across flats: 17 mm · Thread depth: 23.4 mm
13,90 EUR
swiing® revival nut M11x1 x 10 SW17 wheel nut galvanized
Height: 9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF11x1 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 11 mm · Width across flats: 17 mm · Strength class: 8
3,40 EUR
swiing® revival wheel axle set M11x1 x 154 front wheel spokes | Puch Maxi, X30 Sport, Velux
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 11 mm · Total length: 154 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Thread type: MF11x1 (fine pitch thread) · Ball bearing closed: No
55,90 EUR
Not in stock
Explore categories from Hub & axle
Moped fans also bought
swiing® revival Ball Holder 25/37/6.3 Kickbike
Bearing type: Ball ring · Bearing cage: Sheet steel cage ball-guided · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm
9,20 EUR
Hot 
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 185 mm · Ø outside: 11.8 mm · Ø shaft: 11.9 mm · Thread type: MF12x1 (fine pitch thread) · Shank length: 100 mm · Width across flats: 19 mm · Thread length: 26 mm · Thread length: 52.5 mm
17,40 EUR
Cable sleeve, Ø 5 x 2.2 mm, black (6-meter roll)
Ø cable: 2.2 mm · Coating: none · Manufacturer: Made in Italy · Ordering unit: Roll 6 meter · Material: Plastic · Material: Steel · Area of application: Standard · Color: black · Ø inside: 2.5 mm · Total length: 6000 mm · Ø outside: 5 mm
13,90 EUR
2,32 EUR/m
Working late? Evening hours on Thursday until 20:00
