
Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 280 mm
Outer diameter of coil spring: 49 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Manufacturer | Xtreme |
| Color | black |
| Surface | varnished |
| Damping type | Spring |
| Adjustable | Yes |
| Total length | 310 mm |
| Ø spars | 30 mm |
| Ø outside | 49 mm |
| Ø Fastening inside | 10 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Hole spacing | 280 mm |
| Universal |
| Tomos |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
20,90 EUR
MKX shock absorber 28 cm chrome
Manufacturer: MKX · Color: Chrome · Material: Platinum · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Total length: 310 mm · Ø spars: 24 mm · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 280 mm
58,20 EUR
YSS Shock absorber Racing 28 cm (oil pressure)
Manufacturer: YSS · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Total length: 310 mm · Ø spars: 280 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 280 mm
163,30 EUR
Explore categories from Shock absorber & swingarm
Moped fans also bought
EBR fork reinforced black | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black · Adjustable: No · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm · Head tube length: 180 mm · Fork bridge - center wheel axle: 381 mm · Total length: 580 mm · Distance brake cam to wheel axle center-center: 40 mm
155,10 EUR
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Color: black · Color: white · Material: Polyvinyl chloride (PVC) · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank)
11,00 EUR
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Color: Chrome · Material: Steel · Surface: chrome-plated · Width: 730 mm · Height: 400 mm · Fork plate holder length: 100 mm · Ø outside: 22 mm · Clamping diameter: 22 mm · Length handlebar ends: 150 mm · Mounting type: Fork plate · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 320 mm
41,90 EUR
Handlebar fork plate 30 cm curved with strut solid black
Color: black · Material: Steel · Surface: varnished · Width: 640 mm · Height: 280 mm · Fork plate holder length: 80 mm · Ø outside: 22 mm · Clamping diameter: 22 mm · Length handlebar ends: 190 mm · Mounting type: Fork plate · Crossbar: Yes · Ø Strut: 10 mm · Strut length: 200 mm
67,60 EUR








