Hot 
Adjustable premium gas pressure shock absorbers in black with adjustable coil spring for your moped, moped and small motorcycle.
The high-end dampers are mainly used in the cross sector and impress with their optimum adjustability. The response behavior can be easily adjusted with just a few clicks. The height or preload of the springs can be infinitely adjusted by up to 60 mm using a thread. The rear springs should always be secured with large washers to prevent the bearing bushes from shifting when lateral forces occur.
Length (mount – mount): 330 mm
Ø outer spiral spring: 61 mm
Ø expansion joint: 52 mm
Ø bushings for fastening: 10 mm
Color: black / red
The scope of delivery corresponds to one pair.
Simpler rear springs as well as the washers and fastening material can be found under accessories.
Quality product from the manufacturer YSS.
| Manufacturer | YSS |
| Material | Aluminum, Steel, Chrome steel (colloquially known as stainless steel) |
| Color | black, red |
| Surface | anodized |
| Damping type | Pneumatic (air) |
| Ø outside | 61 mm |
| Adjustable | Yes |
| Total length | 370 mm, 340 mm |
| Ø Fastening inside | 10 mm |
| Hole spacing | 330 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
YSS shock absorber Racing 35 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Color: black · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 350 mm · Total length: 380 mm
163,30 EUR
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Number of components: 17 pcs · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon
20,90 EUR
Shock absorber 34 cm fancy neon yellow
Surface: varnished · Color: black · Color: neon yellow · Damping type: Spring · Adjustable: Yes · Ø outside: 50 mm · Mounting type: Nuts & bolts · Ø spars: 30 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 340 mm · Total length: 375 mm
93,20 EUR
MKX shock absorber 34 cm black
Manufacturer: MKX · Surface: varnished · Damping type: Spring · Adjustable: Yes · Color: black · Ø outside: 46 mm · Mounting type: Nuts & bolts · Ø spars: 24 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 340 mm · Total length: 375 mm
58,20 EUR
Explore categories from Shock absorber & swingarm
Moped fans also bought
Side stand black | Puch Maxi S / N, Supermaxi LG1 / LG2, X30 NS / NL / NG-2AH, P1
Manufacturer: Made in Portugal · Material: Steel · Surface: powder-coated · Adjustable: Yes · Length pivot point - floor: 220 mm · Total length: 340 mm · Color: black · Mounting type: Screwed clamp · Number of fixing points: 2 pcs
23,20 EUR
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Nipple length: 14 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Quantity: 36 pcs · Surface: raw · Color: silver · Length from hook: 188 mm · Nominal diameter (thread): 3.15 mm · Ø spoke: 2.9 mm · Ø spoke head: 5.35 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Thread length: 11 mm · Hook angle: 95 °
64,10 EUR
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Ø inside: 15 mm · Bearing cage: Brass cage ball-guided · Ø outside: 35 mm · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Area of application: Standard · Material: Brass · Material: Steel · Stock number: E15 · Surface: blank · Width: 8 mm · Ball bearing closed: No · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
29,10 EUR
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Stock number: E15 · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Material: Steel · Width: 8 mm · Ø outside: 35 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Ø inside: 15 mm · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
58,20 EUR
Brake line 0.9 - 1.9 m (selection) black 28 / 90° incl. banjo bolts
Material: Rubber · Material: Steel · Color: black · Cable length: 900 mm · Cable length: 1000 mm · Cable length: 1150 mm · Cable length: 1400 mm · Cable length: 1600 mm · Cable length: 1700 mm · Cable length: 1900 mm · Mounting type: Screws · Thread type: MF10x1.25 (fine pitch thread)
27,90 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
