Solid sprocket with 32 teeth, compatible with your Zündapp M25 and M50 Bergsteiger mopeds with chassis number 434 and engine type 247.
Note: This sprocket was factory-installed on the 434-02 L1 and 16 LO model series.
You can find compatible drive chains and mounting parts in the accessories section.
Original Zündapp part number: 434-15.126
| Chain type | 415H |
| Chain pitch | 1/2" x 3/16" |
| Material | Steel |
| Surface | galvanized (blue) |
| Color | silver |
| Number of teeth | 41 pcs |
| Ø inside | 46 mm |
| Ø bolt circle | 60 mm |
| Thickness | 4.5 mm |
| Ø mounting hole | 7.5 mm |
| Cranking (offset) | 2.5 mm |
| Number of fixing points | 5 pcs |
| Hole spacing | 32.5 mm |
| Zündapp OEM number | 434-15.126 |
| Zündapp | Moped 25 (M 25) / Moped M 50 Bergsteiger (Type 247-434) |
Accessories & related products
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Color: gray · Ø bore: 4 mm
14,60 EUR
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Color: gray · Ø bore: 4.05 mm
22,10 EUR
32-tooth galvanized sprocket | Zündapp Bergsteiger
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 32 pcs · Ø bolt circle: 60 mm · Thickness: 4.5 mm · Number of fixing points: 5 pcs · Ø mounting hole: 7.5 mm · Hole spacing: 35.2 mm · Ø inside: 46 mm · Cranking (offset): 2.5 mm · Zündapp OEM number: 434-15.130
32,60 EUR
Explore categories from Drive & transmission
Working late? Evening hours on Thursday until 20:00
