Two-armed bearing puller for removing ball bearings such as crankshaft bearings, pinions, transmission shafts etc. on your moped, moped and small motorcycle.
The two parallel arms can be rotated and moved sideways.
The parallel puller has the following technical features:
- Minimum clamping width: 50 mm
- Maximum clamping width: 140 mm
- Clamping depth: 148 mm
- Key width of mandrel: 17 mm
Valuable product from the tool manufacturer BGS Do it yourself.
| Span | 50 mm, 140 mm |
| Manufacturer | BGS - Do it yourself |
| Pull-off depth inside | 100 mm |
| Width across flats Screw | 17 mm |
| Material | Chrome vanadium |
| Number of components | 4 pcs |
| Surface | galvanized (blue), burnished |
| Area of application | (Dis)assembly tool |
Accessories & related products
GPO bearing puller set inside
Span: 8 mm · Span: 25 mm · Manufacturer: GPO · Clamping depth: 10 mm · Clamping depth: 20 mm · Width across flats Screw: 14 mm · Material: Steel · Surface: burnished · Total length: 140 mm · Number of components: 11 pcs · Area of application: (Dis)assembly tool
197,50 EUR
Buzzetti wheel bearing removal tool
Span: 12 mm · Span: 38 mm · Manufacturer: Buzzetti · Clamping depth: 10 mm · Pull-off depth inside: 20 mm · Material: Steel · Surface: burnished · Width across flats Screw: 21 mm · Area of application: (Dis)assembly tool · Total length: 210 mm · Number of components: 1 pcs
73,10 EUR
BGS bottom bracket / bottom hole puller with slide hammer
Span: 7 mm · Span: 28 mm · Manufacturer: BGS - Do it yourself · Clamping depth: 10 mm · Clamping depth: 20 mm · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Total length: 285 mm · Thread type: M10x1.5 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Number of components: 10 pcs · Area of application: (Dis)assembly tool
151,00 EUR
Buzzetti honing tool
Thickness: 10 mm · Manufacturer: Buzzetti · Clamping depth: 100 mm · Width across flats Screw: 24 mm · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Diameter: 94 mm · Total length: 115 mm · Thread type: MF16x1.5 (fine pitch thread) · Number of components: 2 pcs · Area of application: (Dis)assembly tool
69,60 EUR
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Number of components: 1 pcs · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Strength class: 8.8
11,50 EUR
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Area of application: Standard · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44
11,50 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Number of components: 2 pcs · Surface: nickel-plated · Total length: 6 mm · Thread length: 4 mm · Ø outside: 5 mm
2,30 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Area of application: Gearbox lubrication with clutch · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
11,50 EUR
25,56 EUR/l
swiing® revival stud bolt set M6 x 106 mm | Puch
Drive: External hexagon · Width across flats SW: 10 mm · Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Thread length: 13 mm · Thread length: 18.5 mm · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Total length: 106 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
8,60 EUR
swiing® revival screw set engine galvanized | Puch Maxi
Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
11,50 EUR
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Area of application: Chemistry · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
23,10 EUR
330,00 EUR/l
Collection only possible with online purchase and appointment.
