Complete brake anchor plate from the manufacturer Grimeca, including brake pads, suitable for the front brake of Peugeot 103 SP and MVL rims.
With a little skill, the brake plate can also be adapted for Puch bikes. To do this, the collar of the anchor plate and the mounting of the locking cam of the fork must be milled off a little.
Ø outside brake shoes: 90 mm
Width brake shoes: 20 mm
Ø Bore for wheel axle: 12.2 mm
Ø outer brake plate: 110 mm
Height collar (from outer side of plate): 10 mm
Height mounting locking cam: 10 mm
Further accessories such as brake shoes or other brake anchor plates can be found in the accessories section.
| Material | Aluminum |
| Surface | sandblasted |
| Ø External brake pads | 90 mm |
| Ø axle | 12 mm |
| Ø outside | 110 mm |
| Ø bore | 12.2 mm |
| Puch | |
| Peugeot |
Accessories & related products
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Surface: galvanized (blue) · Surface: nickel-plated · Material: Brass · Material: Steel · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Width across flats SW: 7 mm · Area of application: Standard · Thread length: 7 mm
2,90 EUR
swiing® ingenious wheel axle with bearing conversion kit spoke hub front Ø 29 mm | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.95 mm · Ø outside: 29.02 mm · Ø inside: 12 mm · Total length: 165 mm · Thread length: 40.5 mm · Thread length: 50 mm · Shank length: 74.5 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Height: 5.9 mm · Height: 9.9 mm · Width across flats SW: 19 mm · Ball bearing closed: Yes
45,20 EUR
Not in stock
Moped fans also bought
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
11,50 EUR
Side stand black | Puch Maxi S, N, P1 / Supermaxi LG1, LG2 / X30 NS, NL, NG, N-2AH
Manufacturer: Made in Portugal · Surface: powder-coated · Color: black · Mounting type: Screwed clamp · Material: Steel · Adjustable: Yes · Length pivot point - floor: 220 mm · Total length: 340 mm · Number of fixing points: 2 pcs
23,10 EUR
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Quantity: 10 pcs · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
24,30 EUR
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Color: sand-colored · Material: Sealing paper · Thickness: 0.35 mm · Ø inside: 106 mm · Number of components: 1 pcs · Ø outside: 116 mm · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
2,80 EUR
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX, C24. Bravo, SUPERbravo
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Material: Aluminum · Mounting type: Plug connection clamped · Carburetor type: SHA (Piaggio) · Total length: 46 mm · Width: 60 mm · Ø without reducing sleeve: 18 mm · Height: 96 mm · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Area of application: Tuning · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 66
69,60 EUR
Collection only possible with online purchase and appointment.
