Fuel supply

swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)

Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Diameter: 4.9 mm · Total length: 23 mm · Thread length: 6 mm · Thread length: 12 mm · Pony spare part no.: A3700 · Sachs spare part no.: 0640 016 101 · Sachs spare part no.: 0640 016 102

swiing® revival membrane seal 0.4 mm | Sachs 50/2, 50/3, 50/4 (A1840)

Manufacturer: swiing® revival parts · Material: Oiled paper · Hole spacing inlet: 67 mm · Thickness: 0.4 mm · Pony spare part no.: A1840 · Sachs spare part no.: 0250 106 00

swiing® revival stud bolt inlet M5x26 mm galvanized (strength 10.9) | Sachs (A1474)

Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Total length: 26 mm · Thread length: 7 mm · Thread length: 14 mm · Strength class: 10.9 · Pony spare part no.: A1474 · Sachs spare part no.: 0241 031 101

Ripp-Lock washer M5 5.2/12/1.4 galvanized

Material: Steel · Surface: blue galvanized · Thread size: M5 · Ø inside: 5.2 mm · Nominal diameter (thread): 5 mm · Ø outside: 12 mm · Thickness: 1.4 mm

Flange nut M5 galvanized (10 strength)

Height: 5 mm · Material: Steel · Surface: blue galvanized · Nut type: Flange nut · Thread type: M5x0.8 (standard thread) · Drive: External hexagon · Width across flats SW: 8 mm · Strength class: 10 · Pony spare part no.: A1501 · Sachs spare part no.: 0242 024 104

Flange nut M5 galvanized (8 strength)

Material: Steel · Surface: blue galvanized · Nut type: Flange nut · Thread type: M5x0.8 (standard thread) · Drive: External hexagon · Height: 5 mm · Width across flats SW: 8 mm · Strength class: 8

swiing® ingenious intermediate flange 17 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: blue galvanized · Number of flaps: 2 pcs · Total length: 29 mm · Width: 80 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Thread type: M5x0.8 (standard thread) · Thickness: 6.9 mm · Ø inside: 17 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Tuning

Diaphragm insert Sachs 50/2

Hole spacing: 67 mm · Material: Brass · Area of application: Standard · Mounting type: Screws · Number of flaps: 2 pcs · Membrane material: Spring steel · Number of fixing points: 2 pcs · Ø mounting hole: 5.2 mm · Pony spare part no.: A2624 · Sachs spare part no.: 0286 213 010

Polini 2-folding diaphragm insert

Manufacturer: Polini · Area of application: Tuning · Mounting type: Screws · Number of flaps: 2 pcs · Thickness: 2 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 39 x 36/32 mm · Ø mounting hole: 5.3 mm

swiing® revival stud bolt M5x26 inlet (strength 10.9) | Sachs 50/2, 50/2, 50/3

Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M5x0.8 (standard thread) · Total length: 26 mm · Thread length: 7 mm · Thread length: 14 mm · Width across flats SW: 8 mm · Strength class: 8 · Strength class: 10.9 · Drive: External hexagon

Polini lung aluminum

Total height: 40 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Tuning · Total length: 105 mm · Mounting type: Cable ties

Stage6 lung aluminum

Ø inside: 4 mm · Total height: 40 mm · Manufacturer: Stage6 · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Color: Chrome · Surface: chrome-plated · Total length: 105 mm · Total length: 125 mm · Mounting type: Cable ties · Ø External connection: 6 mm

swiing® ingenious intermediate flange 13 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Number of flaps: 2 pcs · Hole spacing: 31 mm · Hole spacing: 67 mm · Thread type: M5x0.8 (standard thread) · Ø inside: 13 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Standard · Area of application: Tuning

Malossi diaphragm plate carbonite 0.3 mm

Manufacturer: Malossi · Area of application: Tuning · Membrane material: Carbonite · Thick membrane platelets: 0.3 mm · Total length: 100 mm · Width: 100 mm

Intermediate flange diaphragm 12 mm | Sachs 502, 50/2, 50/3, 50/4 (A2621)

Area of application: Standard · Material: Aluminum · Number of flaps: 2 pcs · Hole spacing: 31 mm · Hole spacing: 67 mm · Thread type: M5x0.8 (standard thread) · Ø inside: 12 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Pony spare part no.: A2621 · Sachs spare part no.: 0286 210 001

Malossi reed valve carbon 0.3 mm

Manufacturer: Malossi · Area of application: Tuning · Width: 100 mm · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Total length: 100 mm

Malossi diaphragm plate carbonite 0.35 mm

Manufacturer: Malossi · Area of application: Tuning · Width: 100 mm · Membrane material: Carbonite · Thick membrane platelets: 0.35 mm · Total length: 100 mm

Malossi diaphragm plate carbonite 0.4 mm

Manufacturer: Malossi · Area of application: Tuning · Width: 100 mm · Membrane material: Carbonite · Thick membrane platelets: 0.4 mm · Total length: 100 mm

swiing® ingenious intermediate flange 12 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Number of flaps: 2 pcs · Hole spacing: 31 mm · Hole spacing: 67 mm · Thread type: M5x0.8 (standard thread) · Ø inside: 12 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Standard

Athena 2-folding diaphragm Puch / Sachs

Manufacturer: Athena · Number of flaps: 2 pcs · Membrane material: Spring steel · Mounting type: Screws · Area of application: Tuning · Number of fixing points: 4 pcs

Malossi diaphragm insert carbon 0.3 mm | Peugeot 103 / BYE BIKE

Manufacturer: Malossi · Camouflaged: No · Material: Plastic · Surface: raw · Number of flaps: 1 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Total length: 50 mm · Width: 43 mm · Width: 47 mm · Hole pattern [mm]: 32 / 36 x 39 · Thickness: 3 mm · Ø mounting hole: 5.4 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Tuning

Polini 4-flap diaphragm insert

Manufacturer: Polini · Camouflaged: No · Material: Plastic · Material: Sheet metal (steel) · Surface: raw · Number of flaps: 4 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Total length: 72.9 mm · Width: 47.9 mm · Hole pattern [mm]: 35 x 60 · Mounting type: Stud bolts & nuts · Number of fixing points: 4 pcs · Area of application: Tuning

Stage6 reed valve block VForce 3 by Moto Tassinari

Manufacturer: Stage6 · Number of flaps: 8 pcs · Hole spacing: 52 mm

Stage6 reed valve V-Force 3 by Moto Tassinari | Minarelli

Manufacturer: Stage6 · Material: Plastic · Number of flaps: 8 pcs · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Total length: 76 mm · Width: 68 mm · Ø mounting hole: 6.5 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Racing · Area of application: Tuning

Polini Lunge plastic black

Total height: 45 mm · Manufacturer: Polini · Material: Plastic · Area of application: Tuning · Color: black · Total length: 126 mm · Mounting type: Cable ties · Thread type: MF10x1 (fine pitch thread)

Malossi MHR diaphragm intake system PHGB

Manufacturer: Malossi · Camouflaged: No · Material: Aluminum · Material: Viton · Number of flaps: 2 pcs · Membrane material: Carbonite · Hole pattern [mm]: 60 x 35 / 61 x 40 · Ø inside: 24.5 mm · Ø mounting hole: 6.5 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Tuning

Diaphragm seal | Minarelli, Aprilia, Suzuki

Material: Sealing paper · Place of use: Admission · Thickness: 0.5 mm · Ø screw holder: 6.3 mm · Area of application: Racing · Area of application: Tuning