Racing clutch for first gear, compatible with your Tomos moped equipped with an A35 or A55 engine.
Special aramid linings are mounted on steel carriers. Compared to aluminum carriers, steel carriers provide better support and are therefore less prone to deformation, chipping, or delamination at the edges—especially during hard starts and high-performance setups.
The package includes three different spring strengths for the respective application.
Note: Secure the M6 countersunk screws of the racing clutch with Loctite after you have selected the clutch springs that match your engine. The tightening torque is 6 Nm.
A quality product from the American manufacturer Jammer Clutches.
| Manufacturer | Jammer |
| Material | Steel |
| Area of application | Racing |
| Material addition | Composite materials |
| Surface | burnished |
| Number of springs | 3 pcs |
| Number of jaws | 3 pcs |
| Thickness | 14 mm, 26.6 mm |
| Recording type | Interlocking |
| Ø inside | 12.2 mm |
| Ø outside | 84 mm |
| Alternative version of the Tomos OEM no. | 227849 |
| Tomos | A35 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Total length: 32.6 mm · Color: red · Color: white · Color: yellow · Material: Spring steel · Surface: varnished · Area of application: Tuning
34,90 EUR
Clutch Carbon 1st gear | Tomos Classic, Quadro, Sprint, Fun Sport'R
Manufacturer: Made in Europe · Material addition: Carbon · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 1 pcs · Ø outside: 85 mm · Thickness: 15 mm · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
186,60 EUR
Not in stock
Clutch Carbon 2nd gear | Tomos Classic, Quadro, Sprint, Fun Sport'R
Manufacturer: Made in Europe · Material addition: Carbon · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 1 pcs · Ø inside: 28.5 mm · Ø outside: 85 mm · Thickness: 15 mm · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
198,30 EUR
Explore categories from Clutch
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Color: gray · Ø bore: 4 mm · Ø Pin: 3.94 mm
14,60 EUR
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Diameter: 5.95 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread length: 12 mm · Strength class: 10.9
2,10 EUR
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
Polini jet set (100 - 118) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: CP · Nozzle type: Main nozzle · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Nozzle size: 112 · Nozzle size: 114 · Nozzle size: 116 · Nozzle size: 118 · Drive: External hexagon
46,60 EUR
Polini intake rubber Ø 28.5 / 25 mm (PHBG, Polini CP)
Manufacturer: Polini · Material: Rubber · Ø inside: 28.5 mm · Ø inside 2: 25 mm · Ø Passage: 25 mm · Total length: 37.5 mm · Ø External connection: 37 mm · Ø Connection 2 external: 37 mm · Ø outside: 38.5 mm · Clamping diameter: 26.5 mm · Color: black
17,40 EUR
Working late? Evening hours on Thursday until 20:00
