Rubber sleeve for pipe bend and adjusting screw for various Dell'Orto SHA and PHBG carburetors, which are fitted to Piaggio Ciao, Si, Bravo, Boxer, Pony Cross 521, Cilo Cross 521, Pony GTX 521, etc., among others. Mopeds / mopeds are installed.
Length: 30 mm
Ø inside bottom: 7 mm
Ø inside top: 4 mm
The seal protects against false air and unwanted water ingress.
Quality product from the Italian manufacturer Dell'Orto.
| Manufacturer | Dell'Orto |
| Material | Rubber |
| Ø inside | 7 mm |
| Color | black |
| Ø inside 2 | 4 mm |
| Total length | 30 mm |
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Tomos |
Accessories & related products
BING rubber grommet Ø 8 mm carburetor pipe bend
Manufacturer: BING · Material: Rubber · Ø inside: 8 mm · Color: black · Ø outside: 12 mm · Total length: 29 mm · Clamping diameter: 4 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
4,55 EUR
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 6 mm · Total length: 45.5 mm · Total length: 53.5 mm · Internal thread: M5x0.8 (standard thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 85 ° · Height: 30 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
6,85 EUR
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 41.5 mm · Total length: 50 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 80 ° · Height: 35 mm
8,00 EUR
Dell'Orto 30° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 43 mm · Total length: 50 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 30 ° · Height: 13 mm
13,80 EUR
Dell'Orto 90° carburetor elbow set M6x0.75 (long thread)
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 39 mm · Total length: 49 mm · Internal thread: M5x0.8 (standard thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 90 ° · Height: 31 mm
13,80 EUR
Dell'Orto 45° carburetor pipe bend M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Surface: nickel-plated · Ø outside: 6 mm · Total length: 34.5 mm · Total length: 42 mm · Height: 56 mm · Height: 61 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 45 °
8,00 EUR
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Thread type: M6x1 (standard thread) · Surface: galvanized (blue) · Surface: nickel-plated · Width across flats SW: 7 mm · Ø outside: 8 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Total length: 15 mm · Screw head: Hexagon · Thread length: 7 mm · Area of application: Standard
2,90 EUR
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Nipple length: 5 mm · Area of application: Standard · Number of components: 1 pcs
2,80 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Thread type: M4x0.7 (standard thread) · Surface: nickel-plated · Ø outside: 5 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm · Number of components: 2 pcs
2,30 EUR
BING rubber grommet Ø 8 mm carburetor pipe bend
Manufacturer: BING · Material: Rubber · Ø inside: 8 mm · Color: black · Ø outside: 12 mm · Total length: 29 mm · Clamping diameter: 4 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
4,55 EUR
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Thread type: MF6x0.75 (fine pitch thread) · Surface: nickel-plated · Color: silver · Drive: Knurled screw · Total length: 31 mm · Total length: 40 mm · Ø External head: 9.15 mm · Thread length: 15 mm · Ø shaft: 6.1 mm · Shank length: 6.9 mm
3,95 EUR
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 41.5 mm · Total length: 50 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 80 ° · Height: 35 mm
8,00 EUR
Collection only possible with online purchase and appointment.
