Chrome-plated frame reinforcement from EBR suitable for Puch Maxi S / N mopeds.
This is often used on tuned mopeds to protect the frame from deformation due to the extra power.
The two rods have an outer diameter of 18 mm.
Length of mounting hole - stop (adjustable): Approx. 56 - 59 cm
Internal dimension for frame mount: 47 mm
Branded product from the Italian manufacturer EBR.
| Manufacturer | EWC |
| Surface | chrome-plated |
| Total length | 560 - 590 mm |
| Ø outside | 18 mm |
| Number of fixing points | 3 pcs |
| Hole spacing | 47 mm |
| Material | Steel |
| Color | Chrome |
| Mounting type | Nuts & bolts |
| Puch | E50 |
Explore categories from Formwork & frame parts
Moped fans also bought
GPO mudguard strut silver | Puch Maxi S, N
Manufacturer: GPO · Outer width: 25.5 mm · Material: Steel · Surface: varnished · Color: silver · Wheel size: 17 " · Distance mudguard - center hole: 197 mm · Distance mudguard - center hole: 231 mm · Wide intake: 53 mm · Ø mounting hole: 6 mm · Total length: 240 mm · Hole spacing: 34 mm · Hole spacing: 40 mm · Mounting type: Nuts & bolts · Number of fixing points: 8 pcs
14,60 EUR
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: angular · Mounting type: Nuts & bolts · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Wheel size: 17 "
40,70 EUR
swiing® revival 17" rear fender primed | Puch Maxi N
Manufacturer: swiing® revival parts · Color: black · Surface: primed · Material: Steel · Wheel size: 17 " · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: angular · Total length over ends: 625 mm · Scope: 940 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm · Mounting type: Nuts & bolts
39,60 EUR
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Manufacturer: AKOA · Material: Plastic · Ø inside: 20.7 mm · Color: black-matt · Ø External connection: 26 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Tuning
34,90 EUR
Not in stock
swiing® revival Screw Set, Engine, Stainless Steel, Small | Puch E50
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Screw head: Countersunk head · Screw head: Cylinder head · Drive: Hexagon socket · Drive: Slot · Puch OEM number: 900.1216 · Puch OEM number: 900.1308
23,20 EUR
Self-tapping screw, Ø 2.9 x 13, pan head, Phillips, stainless steel
Thread length: 13 mm · Material: Chrome steel (colloquially known as stainless steel) · Nominal diameter (thread): 2.9 mm · Drive: Cross recess · Screw head: Lens head · Total length: 13 mm · Shank: No · Thread type: Sheet metal screw
1,05 EUR
swiing® revival screw set front fender Inox | Puch Maxi S, N
Storage method: Sack · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Screw head: Lens head · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Thread length: 10 mm · Thread length: 15 mm · Shank: No · Number of components: 30 pcs · Strength class: A2-70 · Width across flats: 8 mm
14,80 EUR
Working late? Evening hours on Thursday until 20:00
