Chrome-plated 28 mm cigar exhaust with 70 mm outer diameter, which can be fitted to your Puch Maxi S/N, Puch X30 Sport NS/NL and Puch X30 NG-2A moped after a small adjustment.
Flame pipe and silencer are separate and are supplied without clamp as shown.
Notes: A 70 mm clamp (item no. 11543 or 18313) must be used to fit the Puch Maxi N.
For Puch X30 NG-2A, the spanner must be bent slightly so that it does not protrude from the rear case.
The M6 screw at the end of the pot must be checked and locked with an additional nut, otherwise the nut may loosen and the silencer insert may fall out.
A quality product made in Portugal.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Color | Chrome |
| Total length | 920 mm |
| Surface | chrome-plated |
| Ø outside | 70 mm |
| Number of fixing points | 1 pcs |
| Ø Flame tube outside | 28 mm |
| Ø Internal connection | 28 mm |
| Exhaust type | Cigar |
| Flame tube attachment | Flange |
| Mounting type | Welded lug, Stud bolts & nuts |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Hot 
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Place of use: Exhaust · Thickness: 3 mm · Hole spacing outlet: 42.5 mm
8,65 EUR
Hot
swiing® ingenious Exhaust Clamp, 28 mm, Heat-Resistant, Chrome
Manufacturer: swiing® ingenious parts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Ø inside: 25 - 28 mm · Width: 40 mm · Total length: 40 mm
25,60 EUR
Explore categories from Exhaust system
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Area of application: Tuning
75,70 EUR
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Ø cylinder neck: 48 mm · Surface: sandblasted · Ø outlet inside: 25 mm · Ø piston pin (B): 12 mm · Inlet window: 24 / 20 x 15 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole spacing inlet: 38 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
116,60 EUR
Hot
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Total length: 6 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
18,60 EUR
Hot
GPO 44 mm Cylinder Head Tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 44 mm · Number of fixing points: 4 pcs · Height: 55 mm · Candle thread: short · Width: 125 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Total length: 135 mm · Area of application: Tuning
50,10 EUR
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Total length: 66 mm · Carburetor type: SRE · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
93,20 EUR
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Ø inside: 15 mm · Total length: 46 mm · Height flange center hole: 43 mm · Total height: 53 mm · Camouflaged: Yes · Hole spacing inlet: 38 mm · Area of application: Tuning · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
40,70 EUR
Working late? Evening hours on Thursday until 20:00
