43.5 mm cylinder cover suitable for your Cilo Cross, Pony Cross and GTX moped / moped with Beta 521 or 512 engine and corresponding Airsal 43.5 mm racing kit.
The tuning cylinder head impresses with its high-quality workmanship and precise fit. With the 0.5 mm thick head gasket from Airsal, the crushing edge is only 1.2 mm. Compared to using the racing cylinder with an original head, not only is the combustion chamber geometry optimized by the matching diameter, but combustion is also improved by the lower crushing edge. This leads to greater turbulence in the combustion chamber, which increases performance and efficiency.
If you want to reduce the pinch edge even further, you will also find a 0.3 mm thick gasket among the accessories.
You can find cylinder head gaskets, the matching racing cylinder and a carburetor set in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Alternative to the original Pony spare part number: A8113
| Manufacturer | GPO |
| Material | Aluminum |
| Camouflaged | Yes |
| Surface | varnished |
| Width | 108 mm |
| Total length | 120 mm |
| Ø cylinder | 43.5 mm |
| Candle thread | short |
| Ø screw holder | 6.5 mm |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 48 x 48 |
| Area of application | Tuning, Racing |
| Alternative version of the Pony OEM number | A8113 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta 521 (engine) |
Ratings
Accessories & related products
Hot 
Airsal 43.5 mm cylinder kit Beta | Cilo Cross 521 / 512, Pony Cross 521, Pony GTX 521
Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Displacement: 57 ccm · Crankshaft stroke: 39 mm · Nominal diameter: 43.5 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 18 mm · Ø Outlet outside: 21 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 38 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 48 x 48 · Area of application: Tuning
233,30 EUR
swiing® ingenious intake manifold & carburetor 16 mm tuning set | Beta 521 & 512
Manufacturer: Dell'Orto · Manufacturer: swiing® ingenious parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SHA · Nominal diameter: 16 mm · Ø Internal connection: 18 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Ø Air filter connection: 59 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 82 · Mounting type: Flange · Mounting type: Plug connection clamped · Area of application: Tuning
148,10 EUR
GPO gasket 0.3 mm cylinder head Airsal 43.5 mm cylinder | Pony GTX, Cross 521
Manufacturer: GPO · Place of use: Cylinder head · Material: Aluminum · Ø cylinder: 43.5 mm · Nominal diameter: 43.5 mm · Ø inside: 44 mm · Hole pattern [mm]: 48 x 48 · Thickness: 0.3 mm · Alternative version of the Pony OEM number: A8098
3,40 EUR
GPO gasket 0.5 mm cylinder head Airsal 43.5 mm cylinder | Pony GTX, Cross 521
Manufacturer: GPO · Place of use: Cylinder head · Material: Aluminum · Ø cylinder: 43.5 mm · Nominal diameter: 43.5 mm · Ø inside: 44 mm · Hole pattern [mm]: 48 x 48 · Thickness: 0.5 mm · Alternative version of the Pony OEM number: A8098
3,40 EUR
Explore categories from Cylinder
Moped fans also bought
swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Quantity: 10 pcs · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Total length: 8 mm · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
24,40 EUR
NGK B8ES spark plug long thread
Width across flats: 21 mm · Manufacturer: NGK · Candle designation: B8ES · Candle thread type: long · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Thread type: MF14x1.25 (fine pitch thread) · Area of application: Performance · Area of application: Racing · Area of application: Tuning
7,60 EUR
Hot
Airsal 43.5 mm cylinder kit Beta | Cilo Cross 521 / 512, Pony Cross 521, Pony GTX 521
Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Displacement: 57 ccm · Crankshaft stroke: 39 mm · Nominal diameter: 43.5 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 18 mm · Ø Outlet outside: 21 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 38 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 48 x 48 · Area of application: Tuning
233,30 EUR
AKOA Membrane Carbon | Cilo Cross 521, 512 / Pony Cross 521, GTX 521 (A8114)
Manufacturer: AKOA · Material: Aluminum · Number of flaps: 2 pcs · Membrane material: Carbon · Hole spacing: 35 mm · Thick membrane platelets: 0.25 mm · Number of fixing points: 2 pcs · Total length: 48 mm · Width: 33 mm · Area of application: Tuning · Alternative version of the Pony OEM number: A8114
116,60 EUR
GPO gasket 0.3 mm cylinder head Airsal 43.5 mm cylinder | Pony GTX, Cross 521
Manufacturer: GPO · Place of use: Cylinder head · Material: Aluminum · Ø cylinder: 43.5 mm · Nominal diameter: 43.5 mm · Ø inside: 44 mm · Hole pattern [mm]: 48 x 48 · Thickness: 0.3 mm · Alternative version of the Pony OEM number: A8098
3,40 EUR
GPO gasket 0.5 mm cylinder head Airsal 43.5 mm cylinder | Pony GTX, Cross 521
Manufacturer: GPO · Place of use: Cylinder head · Material: Aluminum · Ø cylinder: 43.5 mm · Nominal diameter: 43.5 mm · Ø inside: 44 mm · Hole pattern [mm]: 48 x 48 · Thickness: 0.5 mm · Alternative version of the Pony OEM number: A8098
3,40 EUR
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
