44.0 mm replacement piston with two 1.5 mm rectangular piston rings with internal fuse (IS) for the 44 mm racing cylinder for your Tomos S25/2, A38B and A35 moped / moped.
The detailed dimensions of the piston according to the technical drawing can be found in the details. In addition, you can find out about the relevant piston rings, their positions and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Nominal diameter | 44 mm |
| Manufacturer | GPO |
| Ø outside piston (A) | 43.96 mm |
| Compression height (C) | 21.9 mm |
| Curvature (D) | 4.15 mm |
| Total piston height (E) | 49.55 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Internal fuse (IS) |
| Piston ring height | 1.5 mm |
| Ø piston pin (B) | 12 mm |
| Tomos |
Ratings
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Number of components: 7 pcs · Total length: 130 mm · Width across flats: 10 mm · Width across flats: 17 mm · Area of application: (Dis)assembly tool
22,60 EUR
GPO 44 mm cylinder kit tuning 12 mm KoBo | Tomos A35
Nominal diameter: 44 mm · Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 22.8 mm · Inlet window: 35.5 x 29.5 · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 36 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
101,90 EUR
Explore categories from Piston
Moped fans also bought
NTN 6203 C3 Ball bearing 17/40/12
Bearing cage: Sheet steel cage ball-guided · Ø inside: 17 mm · Inner ring width: 12 mm · Manufacturer: NTN · Ø outside: 40 mm · Bearing clearance: C3 · Groove ring: No · Material: Steel · Area of application: Standard · Stock number: 6203 · Bearing type: Deep groove ball bearing · Width: 12 mm · Surface: blank · Ball bearing closed: No
10,10 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
11,20 EUR
24,89 EUR/l
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Number of components: 4 pcs · Area of application: Tuning · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 38 mm
11,20 EUR
DMP 44 mm cylinder head (higher compression) | Tomos
Manufacturer: DMP · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Surface: glass bead blasted · Ø cylinder: 44 mm · Width: 145 mm · Height: 66 mm · Total length: 145 mm · Ø screw holder: 8 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44
67,90 EUR
Collection only possible with online purchase and appointment.
