Revised 2021 version of one of the best available cylinders including cylinder head for Piaggio mopeds / mopeds with 10 mm piston pin.
This cast iron cylinder offers a very good increase in performance over the entire rev range and makes it one of the most popular 63 cc racing cylinders for Piaggio engines.
The workmanship is very clean and the matching of the piston windows to the overflow channels and boost parts is very good. The webs in the area of the cylinder head significantly reduce the risk of piston jamming and make the cylinder extremely durable. The cylinder head with its small combustion chamber and large flat sealing surface ensures good compression. Thanks to the additional cooling fins on the sides, this racing cylinder head can dissipate the resulting heat even better and thus protects the racing set from overheating.
Note: Before initial installation, the deco pin must be hammered into the valve seat. To do this, place the cylinder head on a stable surface with the valve ribs facing downwards and insert the pin. The deco pin must then be brought into the correct fit using a medium-strength punch and a slotted screwdriver or punch (Ø 4-6 mm). This method is unusual, but recommended by Malossi. The remaining parts required to complete the valve must be taken from the original valve.
This cylinder kit requires spark plugs with a long thread.
You can find other add-on parts such as long thread spark plugs in the accessories section.
Quality product from the Italian manufacturer Malossi.
The set includes the following fixed parts:
Hole pattern [mm]: 55 x 34 · Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
Hole pattern [mm]: 35 x 55 · Manufacturer: Malossi · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 - 43 mm · Camouflaged: No · Number of fixing points: 3 pcs · Candle thread: long · Decompressor: Yes · Total length: 122 mm · Width: 87 mm · Height: 60 mm · Area of application: Racing
Details
| Manufacturer | Malossi |
| Area of application | Tuning |
| Material | Gray cast iron, Aluminum |
| Displacement | 63 ccm |
| Nominal diameter | 43 mm |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 10 mm |
| Number of fixing points | 3 pcs |
| Outlet type | clamped |
| Camouflaged | No |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 Bravo / Super Bravo Boxer |
Accessories & related products
SITO Plus exhaust Ø 24 mm | Piaggio Ciao, Bravo
Manufacturer: SITO · Material: Steel · Surface: varnished · Ø outside: 14 mm · Color: black · Total length: 690 mm · Ø Silencer: 70 mm · Ø Internal connection: 22 mm · Mounting type: Welded lug · Ø Flame tube outside: 24 mm · Exhaust type: Cylindrical · Number of fixing points: 1 pcs · Flame tube attachment: Plug connection clamped
87,20 EUR
Jasil crankshaft "Racing" 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Jasil · Material: Steel · Cheek type: standard · Area of application: Racing · Thread type: M8x1.25 (standard thread) · Ø coupling pin / vario pin: 12 mm · Crankshaft stroke: 43 mm · Thread length: 13.5 mm · Connecting rod length center-center: 87 mm · Number of gears: 1 pcs · Total length crankpin ignition side: 91.5 mm · Total length crankpin ignition side: 105 mm · Ø crank webs: 69.8 mm · Ø Connecting rod eye: 13 mm · Bearing seat right: 15 mm · Ø piston pin (B): 10 mm · Weight: 716 g · Ø Bearing seat (ignition side): 15 mm · Dimension needle bearing: 10 / 13 x 14.2 mm (axe 10) · Wide crank webs: 32.9 mm · Length 1st paragraph: 21.5 mm · Length 2nd paragraph: 44 mm · Length 3rd paragraph: 64.9 mm · Ø 1st step (on the coupling side): 15 mm · Ø 2nd shoulder (on the clutch side): 14.4 mm · Ø 3rd step (on the clutch side): 12 mm
151,30 EUR
Malossi cylinder head for 41 - 43 mm cylinder kit | Piaggio Ciao, Bravo 1, Boxer
Height: 60 mm · Width: 87 mm · Total length: 122 mm · Manufacturer: Malossi · Material: Aluminum · Area of application: Racing · Surface: sandblasted · Ø cylinder: 41 - 43 mm · Number of fixing points: 3 pcs · Candle thread: long · Hole pattern [mm]: 35 x 55 · Decompressor: Yes · Camouflaged: No
84,90 EUR
Polini Speed Engine engine case breaker ignition | Piaggio Ciao, SI, Bravo, Boxer
Height: 104 mm · Width: 175 mm · Total length: 215 mm · Manufacturer: Polini · Material: Aluminum · Surface: sandblasted · Color: silver · Stock number: 6202 · Crankshaft stroke: 43 mm · Ignition type: Breaker
244,40 EUR
Malossi tuning set 43 mm (version 2.0) | Piaggio Ciao, Bravo, Boxer
Manufacturer: Dell'Orto · Manufacturer: Malossi · Manufacturer: NGK · Manufacturer: SITO · Manufacturer: swiing · Displacement: 65 ccm · Nominal diameter: 65 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Camouflaged: No · Area of application: Tuning
413,20 EUR
NGK B7ES spark plug long thread
Manufacturer: NGK · Candle designation: B7ES · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Candle thread type: long · Thread type: MF14x1.25 (fine pitch thread) · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Width across flats SW: 21 mm
7,55 EUR
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio Ciao PX, C24
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Width: 60 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 46 mm · Height: 96 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Mounting type: Plug connection clamped · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm
77,90 EUR
swiing® ingenious stud bolt M7x120 / Ø 7.3 shank - 10.9 strength
Manufacturer: swiing® ingenious parts · Material: Steel · Diameter: 7.3 mm · Surface: galvanized (blue) · Thread length: 20 mm · Thread length: 30 mm · Total length: 120 mm · Thread type: M7x1 (standard thread) · Strength class: 10.9
5,70 EUR
Moped fans like you also bought:
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
24,30 EUR
SITO Plus exhaust Ø 24 mm | Piaggio Ciao, Bravo
Manufacturer: SITO · Material: Steel · Surface: varnished · Ø outside: 14 mm · Color: black · Total length: 690 mm · Ø Silencer: 70 mm · Ø Internal connection: 22 mm · Mounting type: Welded lug · Ø Flame tube outside: 24 mm · Exhaust type: Cylindrical · Number of fixing points: 1 pcs · Flame tube attachment: Plug connection clamped
87,20 EUR
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX, C24
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Area of application: Tuning · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Width: 60 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Total length: 46 mm · Height: 96 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Mounting type: Plug connection clamped · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Mixed oil connection: No · Vacuum connection: No · Camouflaged: No
69,70 EUR
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Area of application: Tuning · Material: Plastic · Color: black · Ø outside: 53.2 mm · Filter type: Foam · Width: 95 mm · Total length: 31.2 mm · Height: 88.7 mm · Mounting type: Plug connection clamped · Ø Internal connection: 51 mm · Camouflaged: No
23,20 EUR
Malossi cylinder head for 41 - 43 mm cylinder kit | Piaggio Ciao, Bravo 1, Boxer
Height: 60 mm · Width: 87 mm · Total length: 122 mm · Manufacturer: Malossi · Material: Aluminum · Area of application: Racing · Surface: sandblasted · Ø cylinder: 41 - 43 mm · Number of fixing points: 3 pcs · Candle thread: long · Hole pattern [mm]: 35 x 55 · Decompressor: Yes · Camouflaged: No
84,90 EUR
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Malossi · Area of application: Tuning · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 10 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
168,70 EUR
NGK B7ES spark plug long thread
Manufacturer: NGK · Candle designation: B7ES · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Candle thread type: long · Thread type: MF14x1.25 (fine pitch thread) · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Width across flats SW: 21 mm
7,55 EUR
Collection only possible with online purchase and appointment.
