Internal rotor magnetic connection for anticlockwise and clockwise rotating motors.
The electronic ignition is supplied with the base plate from swiing and is therefore suitable for all Puch mopeds such as Maxi S / N with E50 or ZA50 engine, X30 Sport NS / NL (Z50), X30 Sport N-2AH, Supermaxi LG1 / LG2, Velux X30, X30 Racing NG-2AH without any modifications.
Also suitable for all Sachs 502, 50/2, 50/3, 50/4 & 503 engines, as well as Zündapp Belmondo 247 engines.
For the fan-cooled engines, it should be noted that a transition piece must be made from the rotor to the impeller.
This racing ignition is ideal for tuned mopeds.
With integrated speed controller: If the blue cable of the CDI is connected to ground, the speed is throttled to 5000 rpm. Depending on the gear ratio, this corresponds to a speed of approx. 25-35 km/h
Rotor weight: 268 grams
For the basic setting of the ignition, the marking on the pole wheel must match the corresponding marking on the stator when the piston is at TDC.
The installation of a 12 volt voltage regulator is essential, you will find this in the accessories section.
Legendary wiring:
- Stator cable red/black: CDI cable red/black
- Stator cable yellow/green: Ground (bare spot on frame or motor housing)
- Cable stator yellow: Light (unregulated) 0-25V
- Cable stator white: Charging current (unregulated) 0-25V
- Cable CDI orange: Zünd coil
- Cable CDI white-black: Switch-off button (if the cable is connected to ground, the ignition is interrupted)
- Cable CDI black: (connect to ground on ignition coil)
- Cable CDI red/black: Stator
- Cable CDI blue: Speed control, e.g. on switch as on accessories
- .e.g. on switch as listed in the accessories (if the cable is connected to ground, the speed is limited)
Quality product from the Spanish manufacturer MVT Allumage.
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 90 mm · Area of application: Tuning
Manufacturer: MVT Allumage · Tension: 12 V · Performance: 65 W · Direction of rotation: left, right · Ø mounting plate: 94 mm · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Weight: 268 g · Area of application: Tuning
| Manufacturer | MVT Allumage, swiing |
| Tension | 12 V |
| Performance | 65 W |
| Direction of rotation | left |
| Ø mounting plate | 96 mm |
| Ø Flywheel outside | 49.2 mm |
| Ø cable | 7 mm |
| Mounting type | Screws |
| Area of application | Tuning |
| Number of fixing points | 2 pcs |
| Weight | 268 g |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
| Zündapp Belmondo |
Accessories & related products
swiing® ingenious 124 g additional weight MVT, PVL, Selettra
Material: Steel · Surface: galvanized (blue) · Thickness: 4 mm · Manufacturer: swiing® ingenious parts · Ø outside: 65 mm · Number of fixing points: 3 pcs · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Weight: 131 g
22,40 EUR
swiing® ingenious 80 g additional weight MVT, PVL, Selettra
Material: Steel · Surface: galvanized (blue) · Thickness: 4 mm · Manufacturer: swiing® ingenious parts · Ø outside: 65 mm · Number of fixing points: 3 pcs · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Weight: 87 g
20,80 EUR
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Material: Steel · Surface: galvanized (blue) · Thickness: 9 mm · Manufacturer: swiing® ingenious parts · Ø outside: 65 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6 mm · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 50 mm · Weight: 110 g
42,40 EUR
swiing® ingenious pull starter | Puch E50 MVT ignition
Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Total length: 170 mm · Width: 150 mm · Height: 82 mm · Manufacturer: swiing® ingenious parts · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Ignition system: MVT Allumage
174,30 EUR
Not in stock
MVT Premium CDI Box analog ignition | Puch / Sachs
Material: Plastic · Surface: raw · Color: black · Total length: 56.5 mm · Width: 27.5 mm · Height: 29.2 mm · Manufacturer: MVT Allumage · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
91,70 EUR
MVT Premium Stator Ignition | Puch / Sachs
Material: Aluminum · Material: Plastic · Color: black · Manufacturer: MVT Allumage · Number of fixing points: 2 pcs · Tension: 12 V · Number of cables: 4 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
184,70 EUR
MVT ignition coil Premium Ignition | Puch / Sachs
Manufacturer: MVT Allumage · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Place of use: External (outside the ignition) · Ø cable holder: 7 mm · Color: black · Number of fixing points: 3 pcs · Mounting type: Screws
56,90 EUR
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Area of application: (Dis)assembly tool · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8 · Number of components: 1 pcs
11,50 EUR
GPO piston stopper M14x1.25
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Area of application: Special tool · Diameter: 12 mm · Diameter: 16 mm · Total length: 83 mm · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 17 mm · Number of components: 1 pcs
11,00 EUR
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Material: Steel · Surface: galvanized (blue) · Thickness: 9 mm · Manufacturer: swiing® ingenious parts · Ø outside: 65 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6 mm · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 50 mm · Weight: 110 g
42,40 EUR
swiing® ingenious pull starter | Puch E50 MVT ignition
Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Total length: 170 mm · Width: 150 mm · Height: 82 mm · Manufacturer: swiing® ingenious parts · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Ignition system: MVT Allumage
174,30 EUR
Not in stock
Collection only possible with online purchase and appointment.
