Ready-to-install pull-start starter for clockwise-rotating Puch Maxi S / N or Puch Supermaxi LG1 mopeds with an E50 engine and MVT racing ignition.
Unlike many conventional designs, this pull-start starter features a precision-machined pulley made of glass-fiber-reinforced plastic and a perfectly fitting return mechanism. The durable stainless-steel return spring ensures smooth retraction, while the specially woven starter cord operates reliably even under regular use.
The pull starter was tested under the toughest racing conditions by our Mofacross team. This pull starter is ideal for all enthusiasts who value robust construction, precise operation, and reliable starting performance.
The complete pull-start system is assembled in-house and inspected and tested according to strict specifications. This way, you’re always ready to go—even when you need to get moving quickly.
Installation:
- Starter pinion: Clean the MVT flywheel, then screw the counterpart for the cable-pull starter onto the flywheel (secure with the included screws using Loctite).
- Cable starter: Position the starter housing correctly and tap it gently with a plastic hammer until the cable starter fits perfectly. It can then be screwed into place.
Usage:
- Before starting, slowly pull the cord a few times to let the engine idle (must be done before every start attempt).
- Pull out the recoil starter handle until it locks into place and you feel resistance. Then pull it all the way out in one smooth motion.
Tip: Wear gloves! Hold the handle firmly.
Notes:
The original kick-start mechanism can no longer be used because the pedal arms interfere with the pull-starter housing. Therefore, footrests, a longer pedal axle, or a pedal axle extension must be installed.
The cable-pull starter can only be used in conjunction with an MVT ignition system.
You’ll find other helpful parts for the pull-start conversion—such as Loctite, racing gloves, replacement cord, a rubber mallet, etc.—in the accessories section.
A sophisticated product from the premium brand swiing® that meets the highest standards.
| Manufacturer | swiing® ingenious parts |
| Material | Steel, Plastic |
| Surface | chrome-plated, raw |
| Ignition system | MVT Allumage |
| Ø outside | 130 mm |
| Hole spacing | 138 mm |
| Height | 82 mm |
| Color | Chrome, black-matt |
| Width | 150 mm |
| Total length | 170 mm |
| Number of fixing points | 2 pcs |
| Puch | E50 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
GPO pedal axle with chrome rim | Puch Supermaxi LG1, LG2
Chain pitch: 1/2" x 3/16" · Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Number of teeth: 28 pcs · Wavelength from wreath: 41 mm · Wavelength from wreath: 206 mm · Ø Outer sprocket: 120 mm · Ø Pedal arm holder: 15.9 mm · Ø outside: 15.9 mm · Ø Bearing support: 15.9 mm · Total length: 257 mm · Crank (wreath): 7.5 mm
69,90 EUR
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Manufacturer: MVT Allumage · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Tension: 12 V · Performance: 65 W · Direction of rotation: left · Ø mounting plate: 96 mm · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Weight: 268 g
425,80 EUR
swiing® ingenious special screw M6x12 drive pinion pull rope starter MVT
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Drive: Hexagon socket · Screw head: Countersunk head · Width across flats: 4 mm · Thread type: M6x1 (standard thread) · Total length: 12 mm
3,40 EUR
Moped fans also bought
GPO sprocket 9 - 21 teeth wide | Puch
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: Hardened · Recording type: Interlocking · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Total thickness: 4.6 mm
9,20 EUR
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Manufacturer: MVT Allumage · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Tension: 12 V · Performance: 65 W · Direction of rotation: left · Ø mounting plate: 96 mm · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Weight: 268 g
425,80 EUR
NGK CR4 Racing ignition cable & plug High End red / 5 kΩ interference suppressed
Manufacturer: NGK · Material: Silicone · Color: red · Cable length: 500 mm · Spark plug socket: SAE · Cable available: Yes · Resistance: 5000 Ω · Subcategory: Ignition cable · Subcategory: Spark plug connector · Suppressed: Yes · Ø cable: 7 mm
38,40 EUR
Working late? Evening hours on Thursday until 20:00
