Shaft seal ring 20x35x7 mm for use on the crankshaft of your Puch X30 moped, moped with ZA50 engine.
This shaft seal ring (colloquially known as oil seal) is fitted to the crankshaft on the clutch side.
Ø inner: 20 mm
Ø outer: 35 mm
Width: 7 mm
Material: NBR
Temperature resistant: approx. -30 to +100 °C, briefly up to 120 °C
Type: A DUO - With rubberized outer casing and two sealing lips.
| Temperature resistance (min.) | -30 - 100 °C |
| Shaft seal type | A DUO - With rubberized outer casing / two sealing lips. |
| Manufacturer | Puch |
| Material | NBR |
| Ø inside | 20 mm |
| Width | 7 mm |
| Ø outside | 35 mm |
| Place of use | Crankshaft |
| Puch | ZA50 (air-cooled) ZA50 (fan-cooled) |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2.560,00 EUR/l
Oil seal NBR 20/35/7 AS crankshaft | Puch ZA50
Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Material: NBR · Place of use: Crankshaft · Width: 7 mm · Ø inside: 20 mm · Ø outside: 35 mm · Temperature resistance (min.): -30 - 100 °C
6,90 EUR
Explore categories from Seals & gaskets
Moped fans also bought
NSK E20 shoulder ball bearing
Bearing type: Deep groove ball bearing · Bearing cage: Brass cage ball-guided · Stock number: E20 · Inner ring width: 12 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Material: Brass · Width: 12 mm · Ø inside: 20 mm · Ø outside: 47 mm
29,10 EUR
NSK L17 shoulder ball bearing
Bearing type: Shoulder bearing · Stock number: L17 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Material: Brass · Area of application: Standard · Material: Steel · Width: 10 mm · Ø inside: 17 mm · Ø outside: 40 mm
22,80 EUR
Oil seal NBR 17/35/7 AS crankshaft | Puch X30
Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Material: NBR · Place of use: Crankshaft · Width: 7 mm · Ø inside: 17 mm · Ø outside: 35 mm · Temperature resistance (min.): -30 - 100 °C
9,20 EUR
Oil seal NBR 20/35/7 AS crankshaft | Puch ZA50
Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Material: NBR · Place of use: Crankshaft · Width: 7 mm · Ø inside: 20 mm · Ø outside: 35 mm · Temperature resistance (min.): -30 - 100 °C
6,90 EUR
Working late? Evening hours on Thursday until 20:00
