70 cc tuned cylinder for Kreidler Florett RS, RMC, RM, LF, and RM mopeds / small motorcycles.
This high-performance aluminum racing cylinder with a nickel-silicon carbide coating (commonly known as Nikasil) delivers a whopping 8 PS.
Exhaust port diameter: 32 mm
; Intake port dimensions: 28 x 16 mm
; Intake stud spacing: 47 mm
; Bore: 44.0 mm
Includes piston and gasket set.
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find the matching cylinder head for the racing kit as well as other components in the accessories section.
Product from the Italian manufacturer Parmakit.
| Manufacturer | Parmakit |
| Material | Aluminum |
| Camouflaged | No |
| Surface | sandblasted |
| Area of application | Tuning |
| Ø piston pin (B) | 14 mm |
| Number of fixing points | 4 pcs |
| Nominal diameter | 44 mm |
| Ø Outlet outside | 32 mm |
| Hole spacing inlet | 47 mm |
| Thread inlet | M6x1 (standard thread) |
| Outlet type | clamped |
| Kreidler |
Accessories & related products
Rito crankshaft Kreidler Florett K3 42 mm stroke
Manufacturer: Rito · Cheek type: standard · Crankshaft stroke: 42 mm · Connecting rod length center-center: 85 mm · Total length of crankpin on clutch side: 64.2 mm · Total length crankpin ignition side: 63.8 mm · Ø piston pin (B): 14 mm · Area of application: Standard · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Wide crank webs: 39.9 mm · Number of gears: 3 pcs · Number of gears: 4 pcs · Number of gears: 5 pcs
303,30 EUR
40 mm tuning cylinder | Kreidler Florett RS, RMC
Material: Aluminum · Camouflaged: No · Surface: sandblasted · Number of fixing points: 4 pcs · Nominal diameter: 40 mm · Ø piston pin (B): 14 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Hole spacing inlet: 47 mm · Outlet type: slanted · Hole spacing outlet: 50 mm
320,80 EUR
Explore categories from Cylinder
Moped fans also bought
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.95 mm · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread length: 12 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9
2,10 EUR
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Ø inside: 20.7 mm · Manufacturer: AKOA · Material: Plastic · Color: black-matt · Number of fixing points: 2 pcs · Area of application: Tuning · Hole spacing inlet: 38 mm · Ø External connection: 26 mm · Mounting type: Screws
34,90 EUR
Not in stock
swiing® revival Screw Set, Engine, Stainless Steel, Small | Puch E50
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Drive: Hexagon socket · Drive: Slot · Screw head: Countersunk head · Screw head: Cylinder head · Area of application: Standard · Puch OEM number: 900.1216 · Puch OEM number: 900.1308
23,20 EUR
swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50
Ø outside: 130 mm · Width: 135 mm · Height: 93 mm · Manufacturer: swiing® ingenious parts · Hole spacing: 137.5 mm · Material: Plastic · Material: Steel · Color: Chrome · Color: black · Surface: chrome-plated · Surface: raw · Ignition system: HPI · Number of fixing points: 2 pcs · Total length: 160 mm
174,90 EUR
DMP crankshaft full cheeks with mounted bearings | Puch E50
Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Manufacturer: DMP · Material: Steel · Cheek type: Full cheeks · Area of application: Racing · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Thread type: MF10x1 (fine pitch thread) · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 10 mm · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.6 mm · Number of gears: 1 pcs
192,40 EUR
Hot
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning
315,00 EUR
GPO 45 mm piston (Metrakit replica) | Puch
Manufacturer: GPO · Material: Aluminum · Ø outside piston (A): 44.93 mm · Compression height (C): 23.25 mm · Curvature (D): 2.85 mm · Total piston height (E): 49.6 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 45 mm · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1.55 mm · Piston ring height: 2 mm · Thick piston ring: 1.8 mm · Thick piston ring: 1.9 mm · Weight piston kit: 98 g
58,20 EUR
Working late? Evening hours on Thursday until 20:00
